Wismec DNA 200 "warranty service" message

[hybsa03771]

Hello guys i just want to clear the things here. I have my WiSMEC DNA 200 blue screen edition and i just bought it last week from a reseller. I checked the serial and my mod is manufactured last january 27 2016. I don't know if this is an issue or what? I am getting a "Warranty Service" message when i press the power button with 2pcs 18650 batteries, but works fine with 3. It is also giving me the message when i take out 1 of 3 batteries while the screen is on. Anyone having the same issue or is it normal? Thanks guys!  

[DNA Papst]

IT only works with 3x 18650

[hybsa03771]

hello thank you for your reply sir, btw so is it normal that if I use my wismec using 2 batteries then the message "warranty service" will appear? and also does firing my wismec using 2 batteries can damage my mod or some wirings inside my mod? because I accidentally pressed the fire button. im sorry for that, thanks

[BillW50]

  soulvape said:

IT only works with 3x 18650

Expand  

Unless you use a shorted dummy cell for cell 3 (back right) and configure it with EScribe for a 2 cell operation. I used a 2 1/2 inch bolt in mine to see if it really works (133 watts max). It does and then I switched it back to 3 cell operation again.

[hybsa03771]

thanks sir!

[Scarab]

Never saw this message. I try operate mod with 2 batteries (w/o dummy cell). It just won't work w/o any messages. Board manufactured january 29 2016.

[BillW50]

Yes that is what happens with less than 3 batteries. It will work with two batteries (133 watts max), but you must use a dummy cell for the third cell (back right). And configure EScribe to use two cells and then upload it to your mod.

[Scarab]

I know about dummy cell and EScribe configuration. I just doing exactly like TC said and don't saw any "Warranty Service" message.

[BillW50]

Nope mine doesn't either on my four DNA200. But it wouldn't surprise me that some do. Could be firmware dependent too.