John Posted July 27, 2015 Report Posted July 27, 2015 Those are better if they're appropriately sized. Use 18 gauge or heavier wire.
jimmy11 Posted July 28, 2015 Report Posted July 28, 2015 can this connector be recommended for mass production mod sir? or you have anything in mind that's not expensive as the xt30?
John Posted July 28, 2015 Report Posted July 28, 2015 .25" spades will do 25 amps, and are not as expensive as XT30. Something along the lines of http://www.digikey.com/product-detail/en/42100-2/A27936TR-ND/288361
NickyGiaccone Posted April 4, 2016 Report Posted April 4, 2016 http://www.amazon.com/PULSE-LIPO-1350mAh-11-1V-35C/dp/B00UIBCEZU/ref=pd_sim_sbs_21_1?ie=UTF8&dpID=41DguVJnEML&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1NB2HFXY7NACBH7REJ27I bought this one because my friend showed my how easily it fits into an Hcigar VT200. It's not the same feel as when I bought it, but it's not too tight or loose and just powers up. I don't mind the 1300mAh, I'm all about the amperage. I only vape wattage mode, never TC, so DNA mods are shining now that I found power for my cloud chasing. I use the Uwell Rose Gold Crown at .25 dual SS 316 coils vaping near 120W max. This is built in pack of 4 VTC4s, it seems like. I have 1300mAh, although it seems like a lot longer time until it gets low battery. This is the best to get for Hcigars. If you find a slightly great mAh pack with exactly the same dimensions, which fit well, grab them. I wouldn't recommend the 75c minimum output because that might be more than the DNA 200 board can handle.
Daft Chunt Posted July 2, 2016 Report Posted July 2, 2016 Just ordered myself a Triade DNA200, are these batteries ok to use in it or are there better ones out there and if so would you guys be so kind to recommend any?
dwcraig1 Posted July 2, 2016 Report Posted July 2, 2016 Daft Chunt said:Just ordered myself a Triade DNA200, are these batteries ok to use in it or are there better ones out there and if so would you guys be so kind to recommend any?Here's a good place to find info on them, just keep in mind that they are not 35 amp CDR and most likely 20 amp batteries. They should work just fine with in their limits.https://www.e-cigarette-forum.com/forum/threads/efest-purple-35a-3000mah-18650-bench-test-results-only-a-20a-battery-equal-to-hg2-and-30q-though.711203/
Daft Chunt Posted July 2, 2016 Report Posted July 2, 2016 Wow, just read through the post on there. Lying little toe rags!, I'll have a nosey else where. Thanks mate, much appreciated :-) :-) :-)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now