Still having battery bar issues

[2legsshrt]

My battery bar is showing empty on my VT133 and checked the batteries on device monitor and still have 3.69v. Seems as if as soon as it drops below 3.7 the bar is empty. Will keep trying it with the bar at 0 for a while since I know it still has power.

[dwcraig1]

See if you can get a measurment of the voltage drop when firing in Device Monitor when firing with the batteries standing at 3.7 volts.

[2legsshrt]

You mean like this

[dwcraig1]

Certainly nothing excessive going on there.

[dwcraig1]

I calculate my watt hours a little different than most when using 18650's in a mod meant for a lipo pack, this is due to the built in (hardware) cell cutoff 
So I'm using Steve's battery CSV with a soft cell cutoff of 2.9 volts and 12.5% subtracted from the 18650's advertised mah.
My battery icon as far as accuracy seems pretty good. But I'm using LG HD2's not 30q's.
Oh BTW the hard cutoff on a DNA200 is 28.5 volts unless that got changed by a firmware revision......in case anyone is wondering.

[2legsshrt]

OK then my 2 LG HG2's would be 19.425 at that calculation.

[2legsshrt]

Do you think after I put that number in I should do a soft reboot??

[dwcraig1]

just upload to device for sure, perhaps a hard reboot.

[2legsshrt]

OK but I notice that a hard reboot you lose all your settings soft it saves your settings.

[dwcraig1]

You will lose the atomizer's cold setting with a hard reboot, your settings will stay.....not like default settings.

[2legsshrt]

Battery bar still reads empty and batteries at 3.62v. I wonder if I got a bad one or what is going on.

[2legsshrt]

You couldn't ask for a better temp regulation it is almost a perfect straight line with SS316L. Very accurate but the battery bar is really bothering me.

[2legsshrt]

Well battery bar issue fixed again thanks to Steve. I had to DL the .csv battery profile for the LGHG2 load it on my device and now my battery bar is working and showing between 1/3 and 1/2 instead of empty. Thanks Steve your a life saver. Or mod saver.