TheRealPP11 Posted March 30, 2017 Author Report Posted March 30, 2017 I keep getting wierd values when running in temp control on my mod. Sometimes it just goes straight to power by telling me off instead of a value or it will tell me something crazy like 41000f. Also it used to tell me wattage on screen instead of voltage but not its telling me voltage and there is a value even when not firing. Someone please help. I'm including photos in this post.
giz_60 Posted March 30, 2017 Report Posted March 30, 2017 Can you post a few screenshots from Escribe...Device Monitor while firing with the following checked...Power, Power Set, Temperature, Temperature Set, Cold Ohms, Live Ohms...screenshot of your 'Mod' tab & to answer the questions about the displays you are seeing, a screenshot of the 'Screen' tab...Edit: what kind of atty are you using & coil build...the more info, the better...
TheRealPP11 Posted March 31, 2017 Author Report Posted March 31, 2017 im using a limitless classic rdta. im running dual ss claptons on velocity style deck. 32gx2 wrapped with 24g. on my therion 166 dna 250. im posting the screen shots. let me know if i missed anything or if you need more info
giz_60 Posted March 31, 2017 Report Posted March 31, 2017 The weird values you are seeing is the mod dropping out of TC mode to Power mode. The screens you are seeing are correct according to the way it is setup in the 'Screen' tab. In the first screenshot of Device Monitor, your cold ohms are showing .167 & in the second, .163...looks like you have a connection issue. The limitless is a genesis style atty which has 2 screws connecting the mod to the build deck. You need to make sure both of those are good & tight, screws holding the coils are tight...clean the 510 pin on the atty & 510 connector on the mod with iso alcohol...a stable resistance is necessary for TC...also, you have 0 value in the 'Mod Resistance' setting & the 'Case Thermal' values are the stock values...need to run 'Case Analyzer' to get the case thermal values...test for the internal mod resistance...all these are very important for proper TC operations, especially with SS...
TheRealPP11 Posted March 31, 2017 Author Report Posted March 31, 2017 Ok I will try this went I get home from work. How exactly do I test for internal mod resistance?
giz_60 Posted March 31, 2017 Report Posted March 31, 2017 Read this thread, starting at about post #72....https://forum.evolvapor.com/topic/65594-topic/ Giz Method Mod Calibration.docx
TheRealPP11 Posted March 31, 2017 Author Report Posted March 31, 2017 I just did everything you said and I'm going to try it out and see what happens. I'll keep you posted Everything seems to be running smooth now. Thanks
giz_60 Posted April 1, 2017 Report Posted April 1, 2017 TheRealPP11 said:I just did everything you said and I'm going to try it out and see what happens. I'll keep you posted Everything seems to be running smooth now. ThanksGood to hear everything is working for you now!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now