picklefinger Posted May 3, 2017 Author Report Share Posted May 3, 2017 Hi all, wondering if anyone can offer some help or advice.I've had my therion 166 for about 4 months now and yesterday i changed the batteries for some freshly charged ones and the mod now wont turn on. I've check the batteries are installed correctly, tried some fixes in escribe i've found in other threads (resets, restoring defaults etc). I've noticed when i plug it in to my computer the screen comes on very dimly and i can adjust the wattage, but it wont recognise atomisers, fire or actually charge up.Escribe is showing one battery with a lot more voltage than the other, if thats a clue.Thanks for any help anyone can provide Link to comment Share on other sites More sharing options...
giz_60 Posted May 3, 2017 Report Share Posted May 3, 2017 Can you post a screen shot of the Mod tab in Escribe & one of the Device Monitor... Link to comment Share on other sites More sharing options...
BeardedWenger Posted May 10, 2017 Report Share Posted May 10, 2017 Had exactly the same issue and it stopped working under the same circumstances. I took my mod apart and saw that one of the battery contacts on the bottom had a wire that become disconnected. I soldered it back to the contact (spring loaded) and it started working again. Link to comment Share on other sites More sharing options...
legacyman723 Posted May 23, 2017 Report Share Posted May 23, 2017 On 5/3/2017 at 10:21 AM, picklefinger said: Hi all, wondering if anyone can offer some help or advice. I've had my therion 166 for about 4 months now and yesterday i changed the batteries for some freshly charged ones and the mod now wont turn on. I've check the batteries are installed correctly, tried some fixes in escribe i've found in other threads (resets, restoring defaults etc). I've noticed when i plug it in to my computer the screen comes on very dimly and i can adjust the wattage, but it wont recognise atomisers, fire or actually charge up. Escribe is showing one battery with a lot more voltage than the other, if thats a clue. Thanks for any help anyone can provide Same problem with my therion 166. Now a paper weight. Link to comment Share on other sites More sharing options...
NoRm357 Posted May 23, 2017 Report Share Posted May 23, 2017 i have a simular problem Link to comment Share on other sites More sharing options...
NoRm357 Posted May 23, 2017 Report Share Posted May 23, 2017 Link to comment Share on other sites More sharing options...
giz_60 Posted May 23, 2017 Report Share Posted May 23, 2017 2 hours ago, NoRm357 said: If that photo is from a Therion 166, it is looking for to many cells. Go into the 'Mod' tab in Escribe & make sure it is set for '2 Cell' & not '3 Cell'...then be sure to upload to device! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now