[TC problems with Dovpo Abyss DNA60]

20 minuti fa, Wayneo ha scritto:

If that's all you changed or tightened ...... yes. The DNAs require very solid and clean connections.

Great! Thank you very much!

[TC problems with Dovpo Abyss DNA60]

@BillW50 I don't really have an answer for that. I vape in MTL and tried at 16 watts. I am doing microcoil with 27gauge. Now I tried to put to 20w and it arrives to 220°C. 

@Wayneo Yes, now it seems it's working. So this is it? Do you think the screws were the problem?

[TC problems with Dovpo Abyss DNA60]

I tried to change the screws on the deck and this is the result:

[TC problems with Dovpo Abyss DNA60]

3 minuti fa, Wayneo ha scritto:

For both tests was it the same Rubik rba with the same coil?
 

Yes

[TC problems with Dovpo Abyss DNA60]

1 minuto fa, dwcraig1 ha scritto:

Is it the same RBA in the different box?

Oh no, sorry! I didn't understand. The first screenshot is from the AIO, the second is from a regular DNA 75c box.

 

[TC problems with Dovpo Abyss DNA60]

1 minuto fa, dwcraig1 ha scritto:

By "box", do you mean Boro box?

Yes, it's a Dovpo Abyss 

[TC problems with Dovpo Abyss DNA60]

This is the same test done with a different box. So, is it the box that doesn't work?

[TC problems with Dovpo Abyss DNA60]

Hi @Wayneo! So, I did the test and the Ohm's values show small rises of 0,001 but the value doesn't stabilize. 

And then I will attach the screenshot of the Device Monitor.

[TC problems with Dovpo Abyss DNA60]

Il 13/5/2022 in 18:31 , Wayneo ha scritto:

I would not give up so easily raberbone.
TC works easier with a spaced coil or you really gotta make sure there are no hotspots with a contact coil.
At the bottom of the Profile page is Atomizer Analyzer, and with your mod plugged in it should show very small fluctuations, or a small rise then dropping (rinse and repeat).
Then using Device Monitor (while taking a puff) with Power, Power set, cold ohms, live ohms checked/enabled we/you can monitor exactly what's going on. Screenshots appreciated.

Thank you @Wayneo. Unfortunately I can't test the box until Monday. Will update you on Monday morning and test the box.

[TC problems with Dovpo Abyss DNA60]

Yes, I will try. Thanks to you and @Wayneo

[TC problems with Dovpo Abyss DNA60]

So I'm gonna enjoy it in variwatt mode. A little sad and angry, this RBA costs 120 euros 😅

[TC problems with Dovpo Abyss DNA60]

Doesn't work either. Can it be the RBA?

[TC problems with Dovpo Abyss DNA60]

This is the wire 

https://www.zivipf.com/epages/63862298.sf/de_DE/?ObjectPath=/Shops/63862298/Products/NiFe48-0.32/SubProducts/NF48-0.32-10m

 

 

[TC problems with Dovpo Abyss DNA60]

11 ore fa, BillW50 ha scritto:

A DNA will kick out of TC if the wire type selected is wrong or you are using a non-TC wire. So what type of wire or coil head or you using?

Hi! I’m using NiFe48 or 316L. I make simple coil with 5/6 spires with 2/2.5 diameter. Can be the Rba the problem? Is the Rubik rba and it has a lot of pieces 

[TC problems with Dovpo Abyss DNA60]

Hi all! 

I'm having troubles using this mod in TC mode with RBAs: most of the time it says "Off". What can I do? It's awful that a 180$ mod can't what it should do.