[TCR mode for the DNA chipset]

I just want to add that to my experience of exclusive tc vaper for some years the best material I found is the nife 48 by zvipf that is called alloy 52 on steam-engine (the name is different because zvipf measures the quantity of Ni and steam-engine the one of the alloy). Pretty high tc precision, easy to work with, gives coils not ridiculously low and no bad tastes. If you haven't already tried it, give it a chance.

I also want to add that most problems with ss316l and the dnas don't come alone from the low tc precision and low resolution (that in a dna 250c is much more higher than .001 ohm luckily) but it's this combined to the fact that being an alloy not all the ss316l are the same, they can contain the same materials but in different percentages making the tcr/tfr curves not standard and different by maker to maker which leads to inconsistent results. A dna 250c with a good known tfr is perfectly capable of having a good precision on ss316l.

[Mac Suppport]

Why couldn't we have latest sp27? Even Linux users have it

[Vt box 250c]

39 minuti fa, SimonDipi ha scritto:

Quale dei due devo installare?

Fixed-vtbox250c.ecigtheme è quello aggiornato.

Fixed-vtbox250c.ecigtheme is the updated one.

[Vt box 250c]

VapeCige sul suo sito ha anche postato un tema aggiornato che funziona meglio con il replay. Per comodità te li allego entrambi (l'originale e quello aggiornato) direttamente qui.

VapeCige has also updated the theme on their website with enhancements to replay mode. For convenience I attach both of them here.

vtbox_default_theme.ecigtheme

fixed-vtbox250C.ecigtheme

[Mac Suppport]

On latest version of macOS there is a bug with ecigstats. If open it and then minimize it to the menu bar, then if later on I want to reopen it by clicking on its icon and then on "open ecigstats" nothing happens and I'm forced to close it and then reopen it from escribe suite. Not a huge problem but it is handy to leave it in background and when I connect the box for charging automatically synchronize my puffs. Not having this problem when I was using previous major version of macOS.

[Linux EScribe Suite Beta Thread]

@James
Hi, just my opinion but wouldn't be simple to pack escribe in a snap package that could be bundled with whichever dependencies versions you need without interfering on the host system? Installation will only require snap installed and then "snap install escribe", also updating will only require one command. Fast and simple for everyone and future proof.

 

 

[Lost vape triade dna250c not re-sampling room temp]

19 minuti fa, zark ha scritto:

Я улыбаюсь от Вашего непонимания сути устройств DNA!!!

Товарищи не забывайте, что у Вас в Руках не термометр. Мод использует комнатную температуру для определения параметров катушки, только при замене катушки. Зачем Вам делать из платы DNA градусник для измерения температуры комнаты, гораздо умнее купить термометр, если Вы так переживаете за комнатную температуру (к стати в некоторых themes температуру холодной катушки можно корректировать вручную)!

За полтора года использования Triade DNA250c мне ни разу не понадобилось измерять температуру комнаты с помощью мода, но множество раз я менял температуру холодной катушки вручную, для достижения наилучшего Vape.

We don't need the dna as a thermometer but as you said the room temperature is important when vaping in tc. If the box doesn't update the room temperature when changing coil the results can be less accurate. I know that we can manually change the cold temp but then what is the point to have a room temperature sensor if it doesn't work well?

[Lost vape triade dna250c not re-sampling room temp]

Hi, my vtbox 250c has the same problem/behavior. When it is charging the room temperature it is resampled correctly, when I disconnect the power the room temperature is still updating regularly but as soon as I start vaping the room temperature stops updating and no matter how much I left it in idle the room temperature remains the same. The only method to update the room temperature again is to replug the charging cable. It's obviously a firmware bug as the room temperature is accurate and works well in certain conditions. It's also sad because is more than a year that we don't receive a firmware update and there are still bugs to be addressed and room for improvements especially in tc scenarios. It's a very good board but in some specific cases the old non color boards seem to work better and for a high end product and price it's a shame as it could be perfect. I hope evolv is not giving up and will push some fixes or improvements soon...

[Switch preheat from temp to punch]

Gwyar you are right the preheat temp even if set > of target temperature will never exceed it. I just looked at device monitor. So for me the best way is to set the punch directly and only show preheat temp for clarification. Thank you.

[Switch preheat from temp to punch]

Hi all I'm a new owner of a vapecige vtbox 250c from two weeks and is my first dna. I'm very happy with it and love its performance and customizations options. I'm learning the powerful theme designer by looking at some skins. In escribe on a temperature sensing profile you can switch the preheat from temperature to punch. I couldn't find a a way to get and set the preheat type within a skin. Maybe I just overlooked it so I'm asking here.