[Black/No Screen and Warranty Service]

The broken screen (with liquid inside), burn my perfectly working Therion DNA250. (Now in Warranty Service)

A good screen, works for my therion, but not in any other DNA!

 

[Black/No Screen and Warranty Service]

I just sent a ticket with the help desk.

I Hope that the "Big Boss" accept to share some electronic advice with me, i have 4 box (and a lot of money), completely bricked!

For now, thank's for helping @Wayneo!

[Black/No Screen and Warranty Service]

Il 18/2/2019 in 23:42 , Wayneo ha scritto:

@Capobuf Yup, the old screen disconnects value should be zero.

The ribbon cable was probably pinched by the fire button. You can put a bend in the new one's or ensure their placement isn't interfering.

The Ribbon cable was good, in fact i tryed to switch my Therion DNA250 (166W) screen into the Vaporshark DNA Board, and still no image on screen.

With the screen from Vaporshark, to my therion, the DNA it broke, and with microscope i see some liquid inside display, so i suppose goin' short the power and data line.

Can i have some electronics schematics for repair my four (!) DNA Circuit? I have all equiment for SMD resoldering.

At least some value for measure my board and localize the problem...
 

[Black/No Screen and Warranty Service]

Here the full printscreen.

 

22 minuti fa, kingoffoxez ha scritto:

Just incase ,have you tried holding down the fire and down buttons at the same time for 5 seconds on all the mods with a screen that is not working?

Yep, stealth mode it's the first idea i had, but no luck...

[Black/No Screen and Warranty Service]

Hi!

I've 4DNA circuit with similar problem:

1x DNA75 Works but No Screen

1x DNA 250 With "Warranty Service" message and Screen Ok

1x DNA 250 with No Screen But Works

1x DNA 60 with No Screen but works

When i say "Works" i mean that with escribe i was able to set te power and vaporize.

I read a lot, and i have some electronics skill, i want to fix but the shipment cost from italy it's very high. (Even all circuit come from a branded box like vaporshark and lost vape)

So, i want to know a possible troubleshooting way, or a workaround!

In escribe, with a good screen connected in the board, i have a big value that increasing (in Monitoring Device with Debug Mode ON). 
With the board that show "Warranty Service" i see that this value it's 0!