Gavnaf
-
Posts
35 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Downloads
Posts posted by Gavnaf
-
-
I tried, everything is monolithic. Try unscrewing the three screws holding the connector, then pulling it up, it will easily come out, look inside.
-
Hello, in my paranormal nothing shakes. try to disassemble the connector, maybe something foreign is inside.
-
unfortunately, kantal is not suitable for any thermal control mode. This is a feature of this material, it does not change its resistance with temperature
-
Lanzarotechris
You are very attentive, but there is a nuance, I launched the program on the standard settings, without the device). Regarding the voltage off: I see no reason to indicate this item, the battery will no longer give me the power I need at a voltage of about 3.3-3.4
-
Hi, this is very easily solved, in the setup program on the graph of the batteries, pull the first slider down a little to set the voltage to 4.1, then the charge display will be 100%, but in general this is normal
-
кстати я заметил у тебя под отображением еще какой то объект находится, это тоже может влиять, лучше не накладывать один на другой
-
Попробуй на чистом field настроить сначала уже отображение, а уже затем делать "add condition" для подключения зарядки и всего такого. отпиши потом получилось или нет, мне просто лень щас свой мод гонять, если не получится, то это может быть баг самой прошивки, там еще не все моменты исправно работают.
-
привет, я так понимаю ты русский. мог бы скинуть полный скрин экрана, чтоб я понимал в каких конкретно настройках темы ты находишься. просто там есть несколько пунктов. возможно ты выбрал как бы "условие" для обьекта. типа если батарея заряжается то делать вот это. кинешь скрин и напиши какая задача перед тобой стоит, я опишу тебе как это сделать
-
1
-
-
I do not recommend using other people's profiles. You need to test your batteries for more accurate display of charge level. According to my observations, the tests only affect the display of the charge level, this does not affect the work, you can leave the default settings, or adjust the schedule itself, in manual mode.
-
That is, other devices show 0.145 on your atomizer? or is it a calculated value? I advise you to check the connection of wires to the connector, or clean the threads of the connector and atomizer. You also need to firmly hold the screws on the atomizer; a loose connection may make amendments to the resistance. but I would refer this difference to dirty threads and a connector.
-
Hey. Paranormal DNA250c very accurately determines the battery charge. I can assume that your batteries have been used for a long time and have lost their initial capacity and the device has identified and shown it to you. I advise you to replace the batteries with new ones and use an external charger.
-
1
-
Disconnected message on the display.
in General Discussion
Posted
This is a design theme. In the theme editor, you can remove this signature. Or change the subject to another. The mod shows that the charger is disconnected.