-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by InvisibleRasta
-
-
with the older update i had djlsbvapes profiles loaded and it was so much easier to understand and change things. but on his site now he says not to use these profiles
-
seems like its working now... only thing is how do i switch profiles from watts to 316 profile?
really this chip with each update has become more and more hard to use.. i do not understand anything of it anymore... it used to be easy to select watt profile or 316 profile... now i had watts enabled for my rdta.. i want to switch to TC... i select preset 316 and boom... firing at full power... cotton burnt in a second
-
this are the results.... still fires quite lavaish...sometimes at 150C it will fire lava... some other times it will fire godod... with same options profile and whats so ever...without touching anything...super unstable
-
i did not do anything.. everything is as after i did a firmware update, without profiles. but after i did the restore defaults i didnt have a watts option available.. so now i wanted to vape with my rda since my RTA with SS316 is firing lava. I now have the watts option back, thank you for the information.
Back to the ss316 problem, what can i do?
-
i just did a default settings restore so i have the default factory profiles.... from my understanding they are all set to nothing... im using 3 efest batteries... they are pretty old
also with the update the power only profile disappeared.. and now im vaping a kanthal build on the NI profile as there is no power profile
-
hello guys i updated to the latest firmware my dna 200 and now i have 3 presets. titanium ni200 and 316. i do not see the power profile for just kanthal coils... with the old firmware when i used to plug in a non TC wire it would automatically switch to Power mode
-
one time it fires like lava... without changing anything other time it fires and says temperature protected but no vapour comes out
-
i do not fully understand your instructions. I opened device monitor,fired and took a screenshot
i tried to set at 150C but when i fire it shows it goes up to like 1300C.... thats like about to blow up the wire
Is there
-
i restored defaults and i am on the latest firmware... my build is spaced 24 gauge SS316L with 7 wraps on a 3mm drill bit. I selected the SS316 profile as described on my red comment and put the temperature to 130 Celsius but it fires vapour like lava... like if it was on power mode at 200 Watts... Teh Watts output with TC enabled is at max power that i set at.. Watts dont change according to temps... liek i set watts to 50W and it will fire 50W all time
TC not working
-
hello guys i just updated my firmware with excribe to the latest sp 1.5 i think it was. When i try to use TC for SS316L i cant find a profile.
the steps i am using to try to select the SS3162L profile are these that i wrote in red at the bottom. But it gives me only profiles for nickel. Escribe software does not have any preset and i do not know where or how to setup a SS3162l profile
lock the DNA device with 5 clicks, once it is locked hold down booth, plus, minus and fire button and select the material you want to use to vape with temperature control.
Profiles missing
in General Discussion
Posted
thank you Wayneo for helping me setting up my dna200. I finally can vape my SS and claptons properly... as of now i havent seen any weird things happening. thank you again