I had some liquid spill on my Therion DNA 75c & took it apart to clean. The boards seemed to have been built well & not much flux on the solder joints but I still cleaned the remaining flux off the boards & treated the boards with pro gold. Took the screen out prior to doing that. Since the screen was out I also opened it up to clean. What I did notice on reassembly is that the ribbon cable takes slightly more work to install into the connector to make sure its straight & bottomed out before snapping the lock closed on the connector. Not sure if that may be a item to check. The first time i closed the lock I looked at the connector I knew the cable wasnt in correctly & had to lift the tab to unlock re position & held the cable in then snapped the tab closed to lock.
