shimmy1973

I didnt get the wrong end of the proverbial stick 'Black Lace'. Maybe if you'd have read the post b4 resorting to childish name calling you'd have known I didnt blame software or board failure. I'd have more respect for you if you said straight out "hey nit-wit....this is what your doing wrong" and actually helped a dude out but I got your subtle but lame lil dig. I'm tying to sort through why my software jumps in & out of reading ni200. The simplicity of the ni200 build isnt relavent if it wont read the ni200 as nickle but kanthal rather. I already mentioned that posts screws, leads, shorts all checked and double checked. I built the mod to evolv specs in a cnc 1590 A+ w/ a 1350mah 'e-flite' 40C lipo. Different atty's & tanks tried with different tc builds, same. Ive even restored evolv settings and started from scratch. Same again. I let the atty cool to room temp...doesnt help either. Can take 10-20 tried to get it to read ni200...and sometimes it simply wont. I have to put it down and use another mod. It has a mind of its own or so it seems. Thanks for chiming in with 'your' 2 cents though. 'My experience' is ...if you are not going to advise or help without being a dick about it.... keep it moving Mr. or Mrs. Senior Member. You musta had a bad day. I bet your a really nice person and I'm just a dumb noob. Sorry to have taken you away from whatever it is you elitist do. Have a nice evening!

Ok...thank you for the reply. Using a Velocity rda. Twisted 28awg ni200. I dry fire it at low wattage (15w) to work out any hotspots coz they are touching. 10wrap, 3mm inner x 2 o.06ohm build. Ive also tried with Ti & SS.....same result. To touch on your advice to keep it simple, my answe would be why the dna200 then. I bought it because it was advertised to be capable of low hybred builds that I enjoy building. I get it though and appreciate you input. I'm stuck though. Sometimes it works GREAT...other not at all. Please note...Ive tried different builds...and tried the same builds multiple times...same results. I hope someone experienced in my dilemma can chime in and enlighten me

Ive been having much difficulty using the temp-control settings. Ive had the following issues and for the life of me I cannot understand why. I always get kicked out of temp mode and the board stops reading ni200 and fires like it's kanthal.This happens everyday! I can use it for hrs...let it sit, and out I go from temp mode and it's a real b*tch to get it to recognize nickle again. Ive checked and double checked my builds, the post screws, shorts, hotspots....nope, all good there. I thought maybe I build too low (o.o4ohms) so I built higher...no difference. I get kicked out even if its a o.15ohm tc build. I've tried dl'ing cvs. files.....nope, same thing happens. Hell Ive tried everything. I 1st thought user error. So I did my research and tried a hundred different things.....same result. what am I missing here???????

will dna40 large screen oled work?? I fubbed up the screen installing it :/