Jump to content
Evolv DNA Forum

Lowbytes

Members
 View Profile  See their activity

  • Posts

    170

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Posts posted by Lowbytes

  4. Mac EScribe Suite Beta Thread

    in EScribe, Software and Firmware

    Posted

    vor einer Stunde schrieb YeuG:

    Thank you for this! I just saw this today and was able to tinker around a bit on mac escribe. However I am a total noob, just received my dna 250 mod yesterday and have a few questions and please be easy on me..

    I saw a csv file for 3x samsung 30Qs which i have put into escribe into my mod, question is can i change it back to the default setting? Or is it better to just leave the setting with the csv?

    also, i tried to vape at 450F, 500F and 550F on SS316 TC mode however to me they all feel the same, it feels like a cool vape and i am after a warm vape, do you have any suggestions? I ran the device analyser and the graph shows that it is reaching the temps but i feel they all vape the same. 

    Hope you can help me, thanks!!!

    Please let´s move this out of this thread - because cool/cold vape is not belonging to MacEscribe ?! 

  5. theme vapedroid x1c2

    in General Discussion

    Posted

    vor 8 Stunden schrieb SHALE84:

    I agree,it's nice looking mod(ultem one),altough I would never ever spend that amount money on any mod.I just want to say that if someone put his effort and create something(the theme) then he can do with it whatever he want to do.

    I don´t agree - as far as i know - you are not allowed to lock a theme to a mod (i read it somewhere here)

    But of course i´m not sure - i can´t find it anymore!

  9. VTC 75C Warning

    in General Discussion

    Posted · Edited by Lowbytes

    Let´s take a look to the numbers of some measurements  

    Distance lower edge to insulator inside of the tube =                                               69,3mm

    Distance lower edge to positive pole contact inside of the tube=                            68,0mm     (spring loaded positive pole not pushed)

    Distance lower edge to positive pole contact of the tube=                                      69,3mm     (spring loaded positive pushed)

    Thick of the battery cap=                                                                                            3,6mm

    That means a cell of 64,4 mm (of length) will have contact (while battery cap is screwed in totally) - a cell off 65,7mm will push in the spring loaded contact totally (while battery cap is screwed in totally) and just touching the insulator - a cell of more than 65,7mm will be pressed against the insulator (if battery cap will screwed in totally) - In worst case the positive doomed portion of a 26650 (of 67mm length) cell will be bent 1,3mm into the cell (not healthy) 

    By increasing the battery tube length 2mm and chosen 3,3mm of springy way for the positiv pole inside of the tube  never would this have been happened ?!

    But i´ved only used a normal measuring stick - maybe the numbers are +- 0,1mm 

    My2cent it was avoidable!

     

  10. VTC 75C Warning

    in General Discussion

    Posted

    Imho NO - this would give you nothing else than the notification "Atomizer Short"

    It would be the same as using the copper tool for measuring the internal mod resistance - this short is behind the DNA board wich have a Short protection!

     

    Regards

    Mikel

    • Like 1

  11. VTC 75C Warning

    in General Discussion

    Posted

    vor 2 Minuten schrieb soulvape:

    Thats right. My English writing is not Good to write like you it done. Thanks

    i always try to do my best - i am not sure if i do write correct - but it looks like it is good enough

    But hey - it´s nearly 40 years ago that i have finished school  

    • Like 1

  12. VTC 75C Warning

    in General Discussion

    Posted

    vor 16 Minuten schrieb ChunkyButt200:

    try any of these avenues?........

    Tel:86-0755-27345167

    Mobile:+86 15919973387
    Fax:86-0755-27345050

    Email:admin@hcigar.com

    Email: service@hcigar.com (After-Service Support)
    Address:2rd Floor, No. 17 Building, Hualun Technological Park, Phoenix Xingye 1 Road, Fuyong Street, Baoan District,Country/Region:China (Mainland)Province/State:GuangdongCity:Shenzhen

     

    is there a possibility the positive domed portion on the top 26650 was crushed into the cell itself creating a short, whether do to a poorly designed cell or the threaded battery cap being tightened too much? is the positive contact inside the mod spring loaded or static? the cell that vented on you, what does the top of it look like (if there is anything left of it)? can you post some high resolution pics? 

    Mikel (soulvape DNA Germany Group) is still in contact with hcigar - thats the good news

    The positiv inside the mod is spring loaded - springy way around 1,3mm - sure it could happened while he was putting the cell into the mod (maybe the top plate crushed too hard against the spring loaded plus pole ) maybe the force of the battery coverage was too high - who knows - as he reported it starts to blow off while screwing down the threaded battery cap - but we have been informed that more Users running into problem by using 26650 cells (cell heating up - unusable cell after trying to use in this mod! For sure he could have done something wrong - but he´s not alone with this "problem"

    The bad news - due the blow off everything is now one part - as he told us everything is baked together in one part ................ 

     

  13. VTC 75C Warning

    in General Discussion

    Posted · Edited by Lowbytes

    vor 17 Stunden schrieb ChunkyButt200:

    firstly, i do hope you are not seriously hurt.

    i don't own this mod, so i can't comment on the safety of using 26650 cells inside of it (IMO,i think 26650's are just not designed / up to the task for our vaping needs). this could be a design flaw in the vt75c or this could be a poorly designed, poorly performing 26650 cell. there's not enough information from the OP. best bet is to contact hcigar explain your situation and include all the pics and any info you have included in this post. one thing to add, cells that violently vent like that are usually the off-brand re-wraps, with older cell chemistry, with questionable origins. i would stay away from "Fogstar" anything from now on. the brand name alone makes me super cringey.

    It happened while putting in a cell and closing the Battery cover! Hcigar is absolut not responsible - if you write a negativ comment, it will be deleted and you´ll be banned (i´m already banned) b.t.w I´ve reported this issue to a chines shop owner (via PN) - he told me to feel free to share the story to his FB group - 2 hours later comment and pictures were deleted ! He told me, that he got a notification from facebook to do so! 

  14. Reading ohms too low

    in General Discussion

    Posted

    vor einer Stunde schrieb James:

    Hmm. This theme is going to that screen on both SP24 and SP25 for me.

    Indeed - flashed back to SP24 with the same effect - so - i dont know why - i´m more than 100% sure it was different before flashing the SP25

    So no bug - it´s a feature!

     

  17. Reading ohms too low

    in General Discussion

    Posted

    vor 4 Minuten schrieb James:

    @Lowbytes: That should be an effect of the theme. If not, it is a bug.

    This behavior of the theme is new - on Wednesday (using SP24) i´ve change my resistance setup from the main screen - today with the latest sp25 changes it works different - so no changing from my side on the theme - just flashed the latest SP25

    But hey - no problem - it´s different - that´s all - just wanted to report it ;-) 

  18. Reading ohms too low

    in General Discussion

    Posted

    Latest changes on the SP25 giving slightly higher cold ohm readings! So not only scaling changed (like described in the history) - for my opinion a step forward! Noticed that using manually ohm settings also changed!

    Before the latest changes i was able to set ohms directly on the main screen - now pressing select button in the ohm tab changes screen to atomizer settings where i´m able to set the numbers after pressing select  

  22. VTC 75C Warning

    in General Discussion

    Posted

    we guess that different cell sizes (in length) causes this problem - plus - 26650 using a different plus plate (bigger diameter than 18650 ) maybe the force of the battery cover pushes the plate too hard against the upper isolator of the tube and causes a battery short

    but we only guess....... hcigar better have to change the design of their battery tube/Cover - people over here are silly enough to blame evolve for this problems (because they do not understand that the board has nothing to do with this problem)

    As far as i know , Cell size can vary from 65 up to 70 mm - users with relabeled Tensai cells (65mm) reporting no problems - efest are slightly longer 67,1mm giving some people heated cells without using the mod - and soulvape  experienced the worst case scenario - a pocket bomb..........

    just my 2 cent

    Regards

    Mikel

     

     

    • Like 1

  23. Mac EScribe Suite Beta Thread

    in EScribe, Software and Firmware

    Posted

    Thank you for making a dream come true ! 

    No more need for parallels 

    B t w i can confirm that with SP25 regulation has changed - to get the same vaping experiences i´ve to manually set Ohms to 0.33 on sp25 on sp24 0,345 so still different to other DNA´s

    Measured room temperature still way to high (dig Thermometer reads 23,0°C) - looks like still something wrong in my case thermals

    Regards Mikel

    Screenshot at Aug. 04 00-49-40.png

×
×
  • Create New...