BryanC84

I have the custom profiles set for each of my wires, but yes Mactavish kind of sees what I'm saying. I enter the new number and it sets that number for all the wires. If it doesn't make a difference with setting the approximate tcr under the action tab for each individual wire setting, then no worries. Not sure if it did fine tune each wire to work more efficiently or not. I just used titanium as an example. My concern really is setting the approximate tcr value for reactor wire.

Maybe I'm doing something wrong? In escribe I'm not able to set each individual wire tcr approximation under the action tab. For example nickel's default is 0.006 and it's set that way for each of my custom wires. If I change my titanium to 0.0035 it sets that for each wire. Not sure if any of this makes a difference.

Yes I can find very little information as well. I can tell you they're authentic

Imren 3500Mah 30A 18650. Anyone have a csv file for these batteries, and or know if they are safe to use with this device?

Does anyone know what the mod resistance may be for the hcigar vt200?

It seems changing the mod resistance, fixed the deficiency.

This is for kanthal and stainless steel coils, outside of temp control. I just got off the phone with someone and stated that all the devices he saw, showed the same (hcigar vt200). Said you can mess with the mode resistance as you stated. Now to figure out how to do that. Any help will be appreciated. Thank you

Thank you for clarifying the difference. But yes even my ohm readers are on par with the Sx Mini m class, same with my vaporshark rdna 40. The deficiency on the hcigar vt 200 seems to be 0.04-0.07 off on various atties.

Does anyone have this issue. Device works and fires fine, but ohm reading seems to be 0.04-0.07 ohms off from the readings. 0.5 ohm atty will read 0.57 on this Hcigar VT200. I've tried several different atties and it seems to do this to all of them. My tester and SX Mini M class seem to all get the same reading except for my VT200 (Hcigar).