scottkoblitz

Got it set to 2 cell lipo cap 16.8wh soft cutoff 3.2v. Left everything else alone I think. Accept changed kanthol limit to 130.

Yes, I changed it to 2 cell and configured it just like the noname boxmods tutorial video did with escribe. I have the tabs on the groves in the Whit connector pointing down. I have grey to - on battery 2, the blue to the + side of battery 2 which is bridged to - on battery 1. Then I have white and purple to the + on battery 1. Then I have b+ going to + on battery 1 and b- going to - on battery 2. The fire switch on the actual board doesn't work when it's plugged into escribe but in and down work. If I go into troubleshoot and use the onscreen buttons everything seems to work perfect. I'm wondering if the fire button on the board is bad? My soldering iron was acting up so I may have got the board a little warmer then I would have liked but I'm a decent solderer normally and all my connections look good to me. Been soldering building rc trucks boats and hell's for years.

I just built a DNA200 dual 18650 MOD as well. The first time I tried to fire it up it up before I had it in the box the screen would say DNA200 and shut off. Did that a couple times then nothing. I went in to escribe to restore factory settings. When I did this it said I had to upgrade software to do the restore. I did that. Since I did that it doesn't do anything. When I have it plugged in to escribe monitoring/diagnostics/button simulation it says locked click 5 times no matter what I push. Last time I did it It was letting me change the voltage and said check atomizer when I hit fire. I wonder if the fire switch is bad? I tried on board and a separate fire switch. Any help would be appreciated. This is so frustrating. So close to finishing this MOD and then ran into this road block Edit. If I click fire 5 times in diagnostics mode in escrow it unlocks and appears to be working. Could it be a bad onboard fire button?