kraze6548

ssv wire wire is great. i been using it for months. few extra dolllars, but they provide custom csv and have great customer service. it performs better than the other ti wire i tried . everyone has their own opinion so not everyone will agree but i love it and use it on everything . i got 50 ft for 30 bucks and i am still on the same roll since september when i got my first dna 200

nothing wrong with hyperion. they work great. the good thing is that they have a higher nominal voltage. you wont be taxing the packs by charging full. its kinda like setting max recharges but still using max puffs . hope that makes sense

if u are using the evolv connector in the box you do not need to run solder for ground. the board is grounded to the case with mounting screws and the 510 is grounded to case also when its threaded in. i have a reference box and that is how it was setup from evolv

definitely interested

they used 10.22 because they claim thats what they got after running anylyser. i think that value is the best case scenario . i also found that the .007 mod resistance they have is a little high. when i tested my pack i got 9.8 wh and the mod resistance came out as .005 so im now using those values. i also found that i needed to raise the cutoff to 3.2 or 3,3 because the cells become unbalnced with the stock 3.09 cutoff. since i made these changes my pack has been alot closer in voltage when im promted with weak battery .

I have 5 lipo based dna 200s that I love . The battery life isnt the greatest if u vape at higher wattages. On my vs200 with 900 mah lipo i get a full work day easily at 60 watts 500f with crown tank. On my psyclone evo with 1400 mah lipo I get a full and more at the same settings. I bought the wismec after hearing about people getting 2 plus days on a single charge. Problem is that running sony vtc4s and lghe4s I didnt get any longer out of the wismec than I did with the 1400 mah lipo box I have. maybe an hr or 2 longer at the most. on top of that the wismec had the screen ribbon cable under the fire button. the 510 connector was to shallow and only one tank and rda i have would sit flush on it, plus i had to wait forever to charge 18650s . I wasnt impressed with the wismec and it had to go. Im happy with the lipo versions of the dna 200. I have a lipo charger and my batteries can be fully charges in 25 to 45 mins depending on the mah. Its all subjective so if u are happy with the tug box i would keep it.

Wismec did a horrible job of building the reuleaux . The ribbon cable for the screen is routed under the fire button. Every time u fire the mod the button flexes the cable. after flexing fora while cable will fail. common problem . I expect to see a lot more cases of this popping up in the future.

Yes the ribbon shouldn't be user the fire button.it should slightly folded into kinda s shape and tucked under board. Search screen placemnet here and a few posts with pics will come up. Plenty of wismecs have failed and I'm sure plenty more will. Constantly flexing the ribbon cable will ruin it.

Awesome thanks. I wanted to compare what I got on a black version . Should be pretty close to an anodized box I'm asuming. Mine results were almost identical.

scoopy any chance u have the case thermals for the reference mod?

yes that's what ive found by charging on stand alone charger. my hcigar battery only took 1000 first few times then it increased to 1050 for about 5 more chrges . latest test was 1100 but they maxed out there. the battery's were horrible and became super unbalanced so i got the thunderpower and its been good . a lot more consistent power all day on 1 pack . on the stock hcigar batts i was using 2 packs a day and the power drop off was noticeable at 50 percent.

i know and that was the first charge on the battery . glacier lipos got really good ratings and reviews. i read a few different reviews on them and they were always good. i just put some thunderpower 1350s in my vt200 and they only came back 14.20 on the first charge . and they have more mah than the glacier. only 50 more but you would think it would be higher

i just installed the thunder power 1350 in my vt200. had to remove the plate separating the chip and battery compartment . had to shorten the leads from the chip and change the plug on the battery. i removed the tabs on the battery side of the case also. i removed the lipo wrapper and rewrapped it with electrical tape. fits good and i got 14.23 for the first analyser test

1300 mah came back with 14.40 wh i get a whole day at 50 watts 480 t0 500 f in the uwell crown