Jonski
-
Posts
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Jonski
-
-
1 hour ago, niandra3 said:
Are you using 75c? There's some specific steps you need to take to get replay working (International EScribe, right firmware, or course enabling Replay in the profile, etc). If you need help, I can walk you through it (it's my theme)
edit: also go to the Replay Settings page in the menu and it will show you more info (e.g. if Replay is enabled/available with your current setup)
Yeah , it is the 75C I am using and I already have Replay working fine on it, I will have a look at your theme though .
-
2
-
-
21 hours ago, Stepladder said:
I have recently uploaded DJLsb theme with Replay and works just fine. You should beable to navigate to it via my profile. Give me a shout if you need help
Already downloaded it ......and version 2 and version 3
, but haven't got around to loading them up yet . What was the changes made in the latest ?
oh , and thanks for making them
-
I had a look at that one and didn't really like the font
-
Has anyone added 'Replay' To the Lost Vape theme by DJLSB ? , I have tried but it seems to be beyond me .
-
4 hours ago, Sara Turner said:
I Restored Defaults from main page not specifically Theme Default.
You need the default theme or another theme with Replay, any theme you had up until now would not have supported replay .
-
8 minutes ago, Sara Turner said:
thanks so ive got Escribe loaded and Replay checked under Watts and i upload to device but no Replay displays on the device ?
Did you install the Default Theme ?
-
What wire are you using ?
-
I'm pretty sure somebody more knowledgeable will be along to answer your question but for now I'm thinking that Daniels Theme wasn't set up to support Replay, so maybe there is a conflict there .................and maybe I haven't a clue what I'm talking about .
-
Sorry for asking all the obvious question .
You updated the mod to the latest firmware ?
you are using the Evolve default theme ?
What atty are you using ? , I saw some saying they were having trouble if it had a catch cup or beauty ring .
-
5 minutes ago, Rburke2x said:
SS316
And the mod sees the atomizer and reads the ohms right ?
What happens when you take a puff ?
-
35 minutes ago, Rburke2x said:
I can't get Replay to work on my 75c. I've updated everything and gone to profile 8, clicked the "Replay" options but after applying to my mod, all I see is an empty black box under my Wattage and above the "Settings" on my screen. Can anyone help me?
What wire are you using ?
-
1
-
-
@ruckus , I can tell you now that using Replay in wattage only , with no reference to wire type does not seem to result in burnt or dry hits .
I took my Therion BF with Dead rabbit SQ and SS3316L coil to our poker game on Saturday night . I ran it on Profile 8 , Replay in wattage, and to show the lads I vaped the cotton to what looked like dry . No dry hit, and no browning of the cotton .
-
1
-
1
-
-
6 hours ago, HPloco said:
Now to modify my themes for replay. Any advise out there?
Same as yourself, I have my own theme but obviously without Replay . I have had a quick look but can't work out how to add Replay to mine . I'd imagine I'll have to have a look around the web and try to find step by step instructions .
-
1 hour ago, Fordski said:
When I bought my DNA75C devices replay wasn't even on the horizon or promised as a feature. For me the replay feature is an added bonus and I'm quite happy to wait until it's ready.
When I bought my Therion 75C it wasn't on the horizon or promised as a feature either , but I ordered my Therion BF on the strength of Evolves statement on Replay coming to the 75C . Now they didn't give an exact date but they did give the impression that it would be after the 250 C was released .
-
1
-
-
57 minutes ago, HarryHunt said:
Yes it’s the 75c. I’m just wondering if by turning up the watts to max that the board will be working inefficiently by trying to control the set temp with such a high input wattage. I just find it strange that there are no guidelines for this anywhere. My common sense tells me to set the watts around what I would normally vape at in wattage mode.
I don't believe that's how it works ( open to correction as always ) , by setting the watts you are telling the chip the max watts it can put out as opposed to it constantly trying to put out that much . So while mine is set to 75 it will only put out what it needs to get it to the temp I have set . Whereas if the watts are set lower it could take longer to get to the desired temp ............................................... I think
-
3 minutes ago, HarryHunt said:
Jonski, how do u mean properly calibrated? Do the dna chips not come properly calibrated?
They do , it's the internal resistance of the mod that might not be calibrated .
-
Can I ask what mod you are using it on, given the forums I presume it's using the 75C chip and if it's properly calibrated then all I do is crank the watts up full , set the profile to 316l and start the temp off at 360 F and raise it up until I get the vape I want ...usually around the 420F to 440F for my .45 spaced coils . That way the coils won't be lacking in watts to get there .
-
Maybe they are waiting until their own Evolve mod is closer to, or ready for, release .
-
Am I wrong to assume that I would be able to add the 'Replay' function, when it is released, to the theme I am already using by way of the Theme Designer ?
-
I only use standard SS316L in my Therion DNA 75C , I never lock the resistance , and it works everytime . Depending on atty I have it set to somewhere between 400F and 440 F .
-
1
-
-
Just to add, for me it is the Therion 75C and the Serpent SMM with SS316L .
-
1 hour ago, James said:
Could you save and attach your settings .ecig file? Thanks!
Done
-
I'm pretty sure I should be replying here due to lack of knowledge but just to chime in with what I am seeing . I applied the SP24 and now it is reading the coil pretty much dead on and it is not asking 'Old / New' if left idle for a while . But , I need an extra 100F to get a proper vape . 420F before SP 24 now I need 520F .
-
I wanted to start a separate thread to make it easier to find for others who might come looking for this specific info .
I know I'm a bit on the awkward side ( my wife told me ) when it comes to wanting the correct settings on an item I have bought , even if it doesn't make a whole lot of difference to the overall working of it . I'm also not overly happy about having to post this in Evolves forum instead of Lost Vapes but LV don't have one and Evolve seem to be gracious enough to allow this kind of chat .
I used to be good at this kinda stuff , built all my own PC's and that kinda thing but then I turned 50 and now I thank god we don't have to program VCRs anymore so I've struggled with the whole 'run case analyzer' thing myself thinking I need more than just the mod and a connection to the pc and also I was used to the likes of the Vapedroid posting the settings on their facebook page .
Anyway, enough of me taking rubbish, on to the settings :
I asked Lost Vape for the settings and they said they had to run some program and they would get beack to me . More than a week later here are the settings they sent me . Maybe some more in the know might have a look over them and comment and hopefully this thread might help other lost souls like myself .
SS 316L Temp Control Issues
in General Discussion
Posted
I'm sure someone with more knowledge will be along shortly to help you out but for now , what mod are you using and do you know if it has been properly calibrated using the 'Case Analyzer' .
Also , I use Daniel DJLsB's .csv for SS316L .
I only use SS316L , 6 wraps, spaced coils and they come out around .45 and work flawlessly on my Lost Vape Therions in TC but with the dawning of 'Replay Mode' I have left TC behind .