Jump to content
Evolv DNA Forum

speed4mee

Members
 View Profile  See their activity

  • Posts

    42

  • Joined

  • Last visited

 Content Type 

Everything posted by speed4mee

  1. speed4mee
    Did you test your coil on another temp regulatet device, probably too low temperature at 350°F?
  2. speed4mee
    I think this is a ModMakerBox 846024
  3. speed4mee
    @vmax100uk Did you Change Mod - Battery - Capacity to your specified Wh? Use the Watt-Hour Calculator
  4. speed4mee
    Then your USB Voltage is faulty. You can connect to EScribe so your USB Data Line is ok.
  5. speed4mee
    Is there a lighning in the battery symbol? If not then try another USB cable On your screen USB Power is shown as 0.013W, that isn't normal
  6. speed4mee
    Did you use USB 3.0? I'm using an external USB Charger with 1A. To see if it's loading change Screen - Charging Field 1 to USB Current. And don't forget to set the Charging Brightness to 80 % (default is 0).
  7. speed4mee
    That would be nice I have that Live Ohm Reading on my SXK Zero Clone 60W on Temp Control.
  8. speed4mee
    It's at the Field1 as Default. It shows me only the static value from the start but not the changing resistant value in Temp Control (Live).
  9. speed4mee
    Thanks, but i mean Live Ohm Reading on the device. Under Screen - Fields - Default Field 1 there is only Ohms (Standard)
  10. speed4mee
    Is Live Ohm Reading possible?
  11. speed4mee
    Thanks, which model?
  12. speed4mee
    Which enclosure is this? I've made a function mod, all is hand-crafted :
  13. speed4mee
    You can download the file SetupES_2015-07-16.exe and then install in Windows. After that you can upgrade your firmware to Version 2015-07-16
  14. speed4mee
    Thanks, John
  15. speed4mee
    Is it also possible to disable the charging process while using EScribe?
  16. speed4mee
    It would be nice if i can switch from Device Monitor to the Main Screen without closing the Device Monitor Window
×
×
  • Create New...