-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by JLIT
-
-
-
Laguz75 said:
What's the black plastic? UHMW?
It's delrin
Sorry for delayed response. The design has since changed to accommodate custom bezel, full mech switch and aluminum +/- -
Thank you for posting. Definitely going to be using one of these
-
My apologies! I haven't logged on in ages! These will be for sale. However it's up to you if you want to drive over heavily 24k gold mod with a price tag to show for it. Structurally, it will hold but advised against and stated in warranty documentation. Sorry to post link if against forum rules: www.facebook.com/vapecraftdesignstattoo6.0 said:Does anyone have any info on JLit, I've PMed him and emailed him trying to find out if his mods will be for sale anywhere. im outta options at this point and i really want a DNA250 i can drive over with a car. Any help would be greatly appreciated.
-
dylang919 said:
Very nice bro!!! Beautiful mod!!
Appreciate it. Feels like I've aged twice as fast during this whole project but the end result will be worth it. Been using my REV1 over a year with no issues and even drove a 2 ton truck over it for a stress test lol... Have since gone and rough sanded up to 1000 grit from 400 due to the pavement scratches but it took the beating like a champ.
Obvious major changes since this rev1 (delrin buttons, soft tact fire switch only being used internally now with external flush actuator, and the logo, and of course the minor change in plating Sa -
Will have custom actuator flush along with same copper, nickel, show chrome (think motor cycle wheel show chrome), and heavy 24K. All milled from 7075 Aluminum. No epoxy. Custom faceplate pressure fit with backplate held by 0x80 (4) screws threaded to faceplate through delrin backing plate. Lid has milled groove with 4mm of compression via o-rings. Using FDV V3 LP (ceramic core) which is SS and will be 24k plated as well. Been a 8 month project with 50 units going out. Days away from being sent to gold plating from the chrome. Using 3S 11.1V 65C 1550mAh Lipo with its own milled cavity. It's a big f'er.
- 2
-
Was hoping some of the users could show their test rigs (not battery test rigs) or methods for testing many boards pre-assembly (for production runs). I have extra zif connectors and ribbons to possibly assemble a through hole adapter so it isn't necessary to use the zif connector on board. This would be a first making one of these for me so any input is highly appreciated!
-
All I do is plug the usb cord into a wall charger or pc and you get like kited functionality but can still go through the various profiles. If you need to see welcome screen again just unplug and plug back in. I realize the op was referring toseeingthe welcome screen on the device itself when it's in use only after writing what I did. Doh
-
Time to dive in... Thanks everyone for the input
-
-
Appreciate it as well.
-
Jay, are you in Southern California? Been looking for a machinist that's local and familiar with box mods.
-
Thank yoU!
-
Podunk Steam said:
There are some of us here that may not be partial to the ECF like myself, any chance on a good look at the connectors here?
Second that! Would appreciate it! -
Where are these Evolv 510's you guys are speaking of? Would like to take a look at them.
-
DogMods said:
http://www.mouser.com/ProductDetail/Cosel/PBA1500F-12/?qs=sGAEpiMZZMsPs3th5F8koMdmNRcX8UdIkKh46IJzk6xYI%2ff6%2fXG47A%3d%3d
Ample power to spare too Very nice. -
Mad Scientist said:
Im not sure if this is exactly what you're looking for but Steam Engine has DNA 200 .csv files for various wire types.
http://www.steam-engine.org/wirewiz.asp
Go to wire wizard, select your wire type and hit DNA 200 in the tabs along the left of the graph box in the upper right. Download the .csv file and then use that for "custom" wire type in escribe.
Works like a charm lol.
I tried doing so but every time I go to upload a new CSV I get an error saying my X value is too low. I know I'm doing something wrong... -
Been looking for a place to download the correct wire profiles with curves. Anyone care to share?
-
Very understanding company! I read John's and XEVape's following posts regarding multiple irons and decided not to. I'm still ironing out my choice of enclosure and internal fitment of wire running to get a repeatable method that holds up under heavy usage. Thanks everyone who commented
-
Always wanted to use a master on/off locking switch myself but didn't have any builds to incorporate it on. Have a couple OKR's laying around and the identical Ammo can (minus the sexy milled plates), so thanks for the reinspiration and for showing the progress of your project.
-
I envy your filing. Never thought about using a credit card measured out to keep it even when sanding. Thanks for the write up!
-
Was going to do the same. Thanks for showing some clean re-populating of the replacement tact switches
-
VapingBad said:
The fw does both 3S & 2S it is just a setting on the Mod tab next to Battery - Capacity
Even better. Thanks! Downloading on POS laptop with Win 7 now
-
So excited having the option to use 2S and should I decide to go through with 3S builds, just flash the firmware back. Awesome addition so soon!
Let's see your 250's!
in General Discussion
Posted