[love in DNA]

Merry Christmas all EVOLVE team and forum members!!!

[DNA 60]

ChunkyButt200
Best job!!! I envy you.

[Dna 200/250 cutting template]

Thank you

[Battery % issue]

dwcraig1 said:

Perhaps I'm mistaken or it changed by FW update but the cell hardware cutoff for the 200 board is 28.5 volts.

 I like 28.5 volts 
friendly

[Battery % issue]

Maybe better:
 for your "cell soft cutoff" i would input a cutoff of 2.75 volts

[[HELP] My finder 133 cant stop firing]

ari
Atomizer have bad coil, create new coil, try again (clean atomizer dry !!!!!!).

[Let's see your 250's!]

 dwcraig1 

[USB Cable]

ChunkyButt200 say good words.
Or https://www.amazon.de/Charge-Ladeadapter-AiPower-Samsung-Galaxy/dp/B01B63T7TE/ref=sr_1_1?ie=UTF8&qid=1476442068&sr=8-1&keywords=aukey+PA-T13
Have charger and good USB cable.

[Early Firmware and EScribe Suite Discussion Thread]

Willy said:

Neither do I 

HAHAHA...... 

[Early Firmware and EScribe Suite Discussion Thread]

Willy
Sorry, but I don't have computer in mine pocket 

edit:
Situation by YiHi SX350j chip software, one year's create updates when board run good.
EVOLV create 1,5 year's DNA200 updates - don't have "full good work".
Why DNA75 software work good?
I'm sorry if anything incorrect.

[Early Firmware and EScribe Suite Discussion Thread]

It's bad if DNA200 don't have update.
My box-mod work with LiPo 3S1P 1000mA.
If mod sleep, connecting to PC - dead battery meter.
If mod sleep, connecting to charger - dead battery meter.
No good situation if DNA200 don't have update.
p.s.: ........
Sorry

Admin said:
...may be.... 

[USB Charging Board for dna60]

kostasb said:

.......
Can anyone confirm?

I don't make this.

[Doubt about hcigar vti200]

"Hcigar vti200" made long time ago, DNA200 board some use of energy, try to charge the battery separately, by one cell.
I do not believe that DNA200 bad.
VapingBad said true - "It should turn on" without atomizers.
Try, if can.

[Battery problems?]

New battery work well after only 5-8 full charge - recharge. Everything will be fine.
Don't recharge less 30% first times.

["Off" message in temperature control when firing Therion DNA 75]

Evolv SS316 curves work well, to me, no need speed.

[DNA200 Shorted error message only after going idle and waking back up]

ForgottenJedi

Maybe change 510 pin to normal, no BF.
Try.
How it works?
Five days ago to die my 510 pin from RX, same mistakes showed.
Cleanse DNA200 chip, I cleaned my DNA and resistance become less 0,02ohm (mystic)

[DNA200 Shorted error message only after going idle and waking back up]

change mod resistance from 0.012 ? to mod resistance 0.0012 ? or 0.002 

[DNA200 SP3 Bugs..]

My old post:
 "DNA200 v1.2 SP3 firmware, after 2 days.
There is a mismatch, to me, "temperature protection" is not lit(flash) three times, only one, I create in spite of three 1,5x1,5s.
Maybe bug? "
Next post:
 "And to me.
May be so  (is good?)"
From up

After one month try "DNA200 v1.2 SP3 firmware" I say: works good.
If the temperature changes for short (420-430 F) - flash once "temperature protection".
If coil dry - flash three "temperature protection".
A similar principle of DNA75 when battery low. It's perfect.

Sorry four my opinion

[DNA200 SP3 Bugs..]

Same time. My battery meter flash 0% when connecting charger when mod sleep, create reboot, and battery meter work good (30%).
When mod don't sleep - connecting charger and battery meter work good.
Don't understand ???
With SP3 I make 3 reboot in 1 month???
I have LiPo-3S, no 18650.

[DNA200 SP3 Bugs..]

dylang919 said:

With the new escribe, none of my DNA 200's are flashing temp protection correctly and I like that feature. I have it set to flash 3 times (standard). But it only flashes once, and that's while I'm firing. I have to be looking at the screen while firing or I won't see it.....

And to me.
May be so  (is good?)

[DNA board component unattached]

I understand. If have a warranty - to Evolve 
If haven't warranty and there is a desire to repair - soldering(insert and solder).
We have hands

[DNA board component unattached]

Maybe helps:
   

from here http://ecig.eucaly.net/archives/cat_68955.html

[Early Firmware and EScribe Suite Discussion Thread]

DNA200 v1.2 SP3 firmware, after 2 days.
There is a mismatch, to me, "temperature protection" is not lit(flash) three times, only one, I create in spite of three 1,5x1,5s.
Maybe bug? 

[Let's see your 75's!]

Today my vape, LAUDE DR75 & SM Kayfun-V5. I'm crazy 

[Early Firmware and EScribe Suite Discussion Thread]

Hello.
I have DNA200 with "2016-02-23.sw-update" date 2016.05.06. We have new firmware "SetupES 2016-08-05 EScribe 1.2".
He have new "2016-02-23.sw-update" date 2016.08.05 and update SP file "1_2_SP2.sw-service".
I have a question, if possible.
How to update?
  1. Overwrite "2016-02-23.sw-update" to new?
  2. Or install SP file "1_2_SP2.sw-service"?

Helped me, please.
Thank you