Jez650

I have a VT75 Nano and have a similar problem every now and again. The Nano doesn't have the screw in the bottom but I have found that the threads on the body for the battery cover and where the 510 plate at the top tend to get a bit dirty after a while and the 510 plate at the top can loosen after taking a tank off. When the resistance jumps, I take these 2 components off and give the threads a good clean on both the mod and the component, then give them a good tighten down. This fixes the problem. Might be the same for you. Worth a try.

Thanks, I think I have a mod problem. I put a velocity RDA on that I wrapped with plenty of Kanthal and got a reading of 0.08 Ohm's on my Ohm reader on and Ran the Atomizer Analyzer, It just came up with a BIG ? and the screen keeps flashing "Ohm's Too High" Bugger!! Anyone know if this is likley to be a board problem or possibly a dodgy wiring solder point or similar?

Yeah, but the same Atty works fine on the other identical mod. Tried 3 other Atty's that all work on the other mod, not on this one.

Hi guys, I have just received a pair of sBody Elfins and seen to have a problem with one of them. When I put an atty on and press fire, the screen reds Ohm's too high. I have tried multiple atty's, all the same. The second mod is working perfectly. Any ideas? I was wondering if it might have a dodgy 510 connection?

Hcigar and SMY seem to be hitting the shelves now but I have tried ordering the Hotcig, Sd Mini and think vape box75 and even when they have indicated "In stock" they suddenly push the ship date out by a week. A week goes by and suddenly another week is added to the ship time! This has happened multiple times. SMY is finally on the way. No sign of when the others might ship. p.s I have an order in with Angelcigs for the SD Mini, Which still says "In Stock" even with stock numbers! I Emailed them to say where is it after 2 weeks of waiting for something in stock, they wrote back and said "We don't know when they will arrive" I have questioned why they still list it as in stock but no reply has been forthcoming!

Just wondering, are there problems with the supply of DNA 75 boards? There are quite a few manufacturers that have been showing off devices that use this board but seem to just be trickling out to the market, so many of them seem to be pushing back their ship dates time after time....... makes me wonder if they are having trouble sourcing the 75! Can anyone shed light on this question? So many devices that look great, just can't get them!

That post from the Wismec site does not say that they are no longer going to make the DNA 200 version, just that they are constrained by the board supply. We all know that Evolv has been having dramas getting hold of enough screens so that sounds true. Wismec obviously have a lot of cases made and ready to go so I don't blame them for introducing a model that they can pump out in volume. Hopefully alongside the DNA version.