-
Posts
117 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Downloads
Posts posted by UKDTweak
-
-
-
-
-
My V5 Boxer Style, slightly bigger screen window and rounded buttons and reworked the internals a wee bit for the door. This one i spent a lot of time on sanding and polishing to get silky smooth... then added some carbon wrap to the front panel just to be different. Currently fitted with the dual 18650 sled but can easily be changed to a lipo.
- 1
-
-
-
-
-
-
-
-
-
-
I see there is a 3D model of the DNA75C board, but its in Solidworks format, is there anyone with the model in .STL or .3MF format, i dont have solidworks and all converters seem to require purchase, I have searched on google and cannot find anything useful, i would appreciate it if somebody could share a file in either of the two formats above, thanks
- 1
-
Just built my second 3d Printed DNA250, with a 1300mAh lipo..
- 4
-
Just turn up the TC limit on your 316L build, its not a big deal, i use both 317L and 316L in my builds, since Evolv changed to SP's in Escribe, all my builds now need to be set to 240C instead of 200C for the temp limit, to get the same vape i used to get, but i dont get any dry hits and ive vaped my tanks dry on occasion.
- 1
-
-
-
Didn't stop Lost Vape from releasing the Efusion Duo did it?
-
You either have a bad connection or have not set the base/resting ohms properly, check your leads are tightly trapped and the 510 pin on your atty is not loose, then leave to sit and refine.
-
After making a Moonshot tin into a Dual 18650 DNA200, i have now modded a second tin and put in a DNA250 and 1400mAh Lipo...
-
-
-
Moonshot... on the Moonshot mod...
Let's see your 250's!
in General Discussion
Posted · Edited by UKDTweak
Squonk version now built and running