soulseek
-
Posts
36 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by soulseek
-
-
Sticky907 said:
Soulseek, I am definitely new to all of this but I understand how TCR works.
Like I said I am using the curve that SSV provided for their .5mm wire and all I have tried using so far is SSV .5mm wire. I will begin ensuring that the cold resistance is stable like you mentioned. I am currently using a Tobeco Velocity clone.
I wouldn't trust anything coming from SSV, they make bullshit claims that they take Grade 2 Ti and turn it into something purer than Grade 1, which is ridiculous.
Get yourself a good source of Grade 1 Ti and you shouldn't have any problems. -
mandro said:
Love the clear box
This one is 2s with 2 x 1000mah lipo's
Amazing job as always. My favourite one is your previous build. I wish I had a micromill so I could give it a shot myself; my hammond build is ok but I think I'll go for a custom 3D print. -
He obviously isn't very informed and doesn't know anything about custom TCRs. I would link to an appropriate post with info on how to get started with this but I have to run off to work. Hopefully someone else can do it in the meanwhile.
-
It's a problem with the VM. I get the same errors repeatedly using vmware fusion; I have to connect it to a PC to get it to work.
-
Is it really a good idea that most of these self-built mods don't have any sort of vent holes?
-
Yes, today in the afternoon I decided to try connecting it just out of curiosity at the office PC and it worked without any problems. Previously I was running it through a VM; I tried VMware Fusion, Parallels and different Windows versions, on different computers but always got the same error.
For the time being I'll have to use a PC until I get it to work with a VM. -
Wibberly said:
I wanted to see how small I could make my enclosure. The battery connection and wire gauge is not ideal but I'm unlikely to run it at full pelt.
Great job. Would you mind me asking where you bought the metal pins for your buttons? -
mandro once again an awesome looking device, probably the best one. Are the parts for the case (and buttons) off the shelf or did you make them yourself? I was hoping to be able to buy them.
-
Bump!!
Does anyone from Evolv have any feedback or should I just RMA this board? -
So I recently got a board, I've connected my 3S Lipo on it and when I try to connect it to Escribe I get the error "EEPROM read failed". I've updated the firmware but every time I try to connect or upload/download settings I get the same error.
I live in Europe and got this from stealthvape uk; it seems that it's one of the early boards as the date I get through Escribe is 18th of June.
Any ideas?
Titanium TCR temps way off
in General Discussion
Posted
Don't use SSV wire, it's not grade 1 and they make false claims of taking Grade 2 and converting into something purer than Grade 1 which is ridiculous.
Also, if you're getting a decent vape with 175C then it's your Ni that is inaccurate; at 175C you should barely be getting any vapour at all.