Jump to content
Evolv DNA Forum

mikepetro

Members
 View Profile  See their activity

  • Posts

    190

  • Joined

  • Last visited

 Content Type 

Posts posted by mikepetro

  5. DNA 75 software

    in EScribe, Software and Firmware

    Posted

    The latest version of EScribe that works with BOTH the DNA200 and the DNA75 is
    [image]


    However, make sure you are not running the DNA200 2016-04-25 firmware (which was beta FW). If you are then please roll back to the 2016-02-23 firmware.

    The most recent "released" version of DNA200 FW you that you should run is 2016-02-23

  6. DNA 75 software

    in EScribe, Software and Firmware

    Posted

    From another, potentially related, post:

    mikepetro said:

    There was only 1 version that included a FW update for the DNA200, that was version 1.0.49 (dated 4/25/16) and it accidentally got leaked here (then pulled). It was intended for "beta testers" only.

    There is NOT any "release version" of new DNA200 FW at the time of this posting.

    If you ever installed 1.0.49 (dated 4/25/16) then the FW will still be in your folder, even though you have upgraded to 1.0.56 or whatever.
    The newer versions dont include DNA200 FW, but they dont delete the old ones either.

    If you run this 1.0.49 FW (dated 4/25/16) and your DNA200 dies, dont say you weren't warned!!!!

    If you are running it, I would recommend rolling back to a previous version!

  14. Is this battery safe?

    in Batteries and Charging

    Posted

    Rocky said:

    Hey! So I'm gunna be running a Turnigy 2200mAh 40C lipo to power my DNA 200 and wanted to know if it will be safe even if one of my friends decides to fire it up to 200W... Is firing on max wattage with a low resistance coil a cause for concern with such a battery?



    Not a concern, the board will protect itself against over current/voltage etc. It is rated to handle the full 200w....

  15. Early Firmware and EScribe Suite Discussion Thread

    in EScribe, Software and Firmware

    Posted

    MikeTheVapeDude said:

    What was it about the 4-25 update that was dangerous to the mod? I got a dead battery bar indicator with a full charge which a soft reboot fixed, then came here and saw all the talk about it bricking DNA's. What is going on with it?



    Dont know what the root cause is, just told you my own experience and what has been reported elsewhere.

    My recommendation is to roll back to 2-23-16. Instructions have been posted several times.

  18. Evolv, will you survive?

    in General Discussion

    Posted

    I personally am going to keep an eye on this organization. They have legal teams who will be better poised to give us direction.

    https://www.facebook.com/CASAAmedia/?fref=nf

    "Today, CASAA, SFATA, AEMSA, AVA and NBS have formally announced their coalition to pursue legal and legislative strategies now that the FDA’s final deeming regulations have been released."

  19. Evolv, will you survive?

    in General Discussion

    Posted

    Relevant links of interest Direct from the FDA:

    Vaporizers, E-Cigarettes, and other Electronic Nicotine Delivery Systems (ENDS):
    http://www.fda.gov/TobaccoProducts/Labeling/ProductsIngredientsComponents/ucm456610.htm
    Retail Overview: http://www.fda.gov/TobaccoProducts/GuidanceComplianceRegulatoryInformation/Retail/ucm205021.htm
    Importing and Exporting: http://www.fda.gov/TobaccoProducts/Labeling/ucm290823.htm

    Now, there are an Army of Lawyers pouring over this thing, and I am sure they will find some loopholes here and there, but this is where it stands as of now.

  20. Evolv, will you survive?

    in General Discussion

    Posted

    VapingBad said:

    So unless I get this wrong if the boards and other parts are certified/licensed/whatever you could make mods, but not sell them, how about giving them away?


    Laguz75 said:

    Giving them away.......that could work and charge $100 for shipping



    FDA says:

    "Do NOT give away free samples of e-cigarettes or other ENDS, including any of their components or parts"

    http://www.fda.gov/TobaccoProducts/GuidanceComplianceRegulatoryInformation/Retail/ucm205021.htm

  22. Evolv, will you survive?

    in General Discussion

    Posted

    Black Lace, it obvious you have not read the regulations or the various summaries on it. Please read that actual new law before challenging us further.

    Edited to add: Here is a good link to start with:
    www.fda.gov/TobaccoProducts/Labeling/ProductsIngredientsComponents/ucm456610.htm

  23. Evolv, will you survive?

    in General Discussion

    Posted

    black lace said:

    Am i missing a few threads on this or has someone misenterpreted mom&par as a manufacture and likend term of frase to themselves.



    From the FDA website:

    "If you operate a vape shop that mixes or prepares liquid nicotine or nicotine-containing e-liquids, or creates or modifies any type of ENDS, you are considered a manufacturer"

    The green part means Mom and Pop shop that mix ejuice.
    The purple part means Modders, anyone who creates a Mod and sells it.
×
×
  • Create New...