Battery indicator

[biohazard]

Hi !!! i have an issue ... after the first charge (usb) the battery indicator level dont show if is empty or full ... i just can see the level on escribe ... Board damaged ? any ideas ?

Thanks in advance 

At the time i take the picture battery is at 75 % 

 
Luis

[Bapgood]

What is the battery specs?
What do you have the capacity set to in EScribe?
What does the Device Monitor show the charge Wh as?

[biohazard]

The battery is a Turnigy 2.2 A  3S...
Capacity set to 24,42 Wh
Device monitor shows 0.150 Wh

[Bapgood]

In the device monitor go to Diagnostics - Set Charge Estimate and input the approximate Wh. Easier to set when its fully charged and you can just set it to the 24.42 Wh.

[biohazard]

Thanks a lot ... i´m feeling so dummy 

[Bapgood]

I will let someone from Evolv confirm/explain for sure why it didn't set the charge value when you charged it. However I believe the DNA might need a full discharge/charge cycle after changing the capacity to update itself.

[John]

Either do a full charge cycle, unplug and replug the battery, wait through a refinement cycle (about an hour) or use Escribe and set a charge estimate in device monitor.