Battery Percentile

[redwolfe90]

I've been playing with the DNA200 and Escribe for a few days together and I was wondering why but whenever the screen shows the battery at 42-44% I get a few more vapes out of it and then it shows "Weak Battery" I let it sit for 10-15 minutes and go back to vape it and it'll show 0%. Why is the such a large gap when showing 0-44% but it won't show anything in between? Could I possibly have the discharge curve set improperly? 

[KTMRider]

What mod do you have? What battery? 

There's a setting in Escribe to set the Wh of the battery under the Mod tab. That should give you a more accurate battery meter. 

[redwolfe90]

I have a Hana Modz 200 and I have one I made myself. The hana has a 950 nano-tech turnigy and my mod has a great planes 1200mah.

[KTMRider]

My Hana Modz v200 didn't have the correct setting for the battery when I received it. There's a calculator in Escribe to help you get the right wh value (10.55 for 950mah 3S). 

I have a 3d print by Blueridgedog with a 1300mah 3s and the Hana v200 with a 950mah 3s. I have 2 config files for each mod. The only difference is the wh value. 

[redwolfe90]

I checked my settings, the Hana was set to 10.54 and my 3d printed mod was set to 14 since that's what is on the pack.

[John]

Yes, it is probably the curve. Or the actual loaded watt hours. You are running the most recent firmware?

[redwolfe90]

I am, maybe it had something to do with MY curve, I swapped both back to the default curve in Escribe and now they been lasting MUCH longer than before. Usually after 5-6 hrs my Hana is down to 50% and I just checked it a half hour ago, it was at 65%.