![](https://cdn.evolvapor.com/evolv-forum/set_resources_3/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
![](https://cdn.evolvapor.com/evolv-forum/set_resources_3/84c1e40ea0e759e3f1505eb1788ddf3c_default_photo.png)
Br114nAcc
-
Posts
42 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Br114nAcc
-
-
and the 100c screen is a tad bit longer aswell
-
My thelema 100c is way brighter and vibrant than the thelema 250c is this maybe because it's older or are there any settings in escribe that could change the screen brightness, yes both are at 10, and this is an accurate, but a bit darker representation of what the screen looks like due to the flash. the 250c is washed out and darker and the 100c is way brighter and more vibrant
-
I have had problems with really slow to vape coils due to their density, but after looking at device monitor i have come to the conclusion that replay is better than boost, fire your coil till it is warm and then take the desired hit, once you do that click replay! Set the warmth to what you like, and replay will throttle the wattage way above your desired wattage to get it warm as it was at the beginning of your hit then it will lower the watts way below as you continue to drag, it definitely is a game winner when it comes to high heat capacity coils! and the odd thing is i would reccomend in the mod settings clicking allow dubious coils, because replay although needing a tc coil does not actually use tempurature at all it only uses wattage. All and all, replay is your friend if you have large coils or dense builds (also make sure your batteries cdr and volts can handle whatever watts it throttles to)
-
Just now, Br114nAcc said:
but for sure thank you so much for the help with all of the other stuff, you helped me know how to read device monitor and what to change to get a better hit for my rta builds, i appreciate that, thanks when i came on here i did not expect to get such great help that quick so thanks
-
-
Just now, Br114nAcc said:
nope still definitely at .111-.112 ohms constant and raw ohms is .115
it is quite literally a perfect build it isn't even changing from .111 it is constant for minutes on end
-
15 hours ago, dwcraig1 said:
Are you using the same wire as in your earlier posts? The resistance of 0.12 troubles me. With building the same coil with the same wire but 6-7 wraps instead of 10-11 should be around 0.21 ohms for the pair of coils. Is there any chance they are touching the chamber? Have you checked resistance with the chamber removed, deck only?
nope still definitely at .111-.112 ohms constant and raw ohms is .115
-
15 hours ago, dwcraig1 said:
Are you using the same wire as in your earlier posts? The resistance of 0.12 troubles me. With building the same coil with the same wire but 6-7 wraps instead of 10-11 should be around 0.21 ohms for the pair of coils. Is there any chance they are touching the chamber? Have you checked resistance with the chamber removed, deck only?
i'll check right now, it seemed to have been working recently and last night i was just adding a working replay function to my theme. seems like the only type of vape that gives me a good hit is replay as of right now lol but yes let me check real quick
-
2 minutes ago, Br114nAcc said:
well damn now i am getting a throttling message smh idk what is wrong with either this mod or atty
nevermind, idk what happened but i just reset the ohms and they were the same yet it stopped saying it lol idk
-
well damn now i am getting a throttling message smh idk what is wrong with either this mod or atty
-
here are the pictures after i got an identical tank just a new one with a fixed 510 pin, it is way more stable, and way faster time and idk if there would be any things that might help with showing what could be up with the ohms of the coil, first is watt with boost then with no boost, second is tc with no preheat
-
19 minutes ago, dwcraig1 said:
Let your coils cool and use EScribe's Atomizer Analizer to check resistance.
could it be that this isn't actually ss316L
-
18 minutes ago, Br114nAcc said:
that was the starting cold resistance before even firing, but i'll try on escribe see if that makes any change
it is showing up as a constant .111-.112 perfect not changing at all
-
1 minute ago, dwcraig1 said:
Let your coils cool and use EScribe's Atomizer Analizer to check resistance.
also personally, just for future reference do you dry fire or just wash your coild when changing the cotton, i wash them and dont dry fire when changing cotton because i always end up burning them when i dry fire and if i dont burn them, whatever gunk that was on them just solidifies on them and gets really dark or light pink which is quite odd lol and i dry fire at 13-17 ohms
-
Just now, dwcraig1 said:
Let your coils cool and use EScribe's Atomizer Analizer to check resistance.
that was the starting cold resistance before even firing, but i'll try on escribe see if that makes any change
-
2 minutes ago, Br114nAcc said:
hmm that's odd i'll give it a try, but for me when i put it in there the Id never changes the ohms
and on top of that even weirder i have the exact same build just spaced, and yes evenly spaced, but it is showing on my mod as .11
-
-
7 minutes ago, dwcraig1 said:
316 316L are so close.
So it says 0.4 ohms, is that per coil or total. My experience says per coil.
that is per coil, and total is .2. But my mod is reading them as .11 so i really dont know why they say they are so low. ss316L has an 18.92% higher resistance than ss430 so it shouldn't make that much of a difference
-
3 minutes ago, dwcraig1 said:
SS316 has a slightly higher resistance than SS430, about 20%
and it's ss316L
-
-
2 minutes ago, dwcraig1 said:
0.11 doesn't seem right
that's what i was thinking
-
-
Just now, dwcraig1 said:
Are you using two strands of 28 gauge SS316 twisted like mine, or just one strand?
two strand twisted like yours
-
3 minutes ago, dwcraig1 said:
thanks for letting me see,mine looks about the same, so that is normal as long as the cotton isn't turning black? and i'll try running it at the watts u said because now i have a spaced 7/6 wrap dual coil with .75 twist pinch and same 28aug ss316L came out to .11 this time i think i might have made the cotton a bit too thin lol it's leaking like hell when i hit it, and i saw from an old reddit post that with my mod if you make the coils a bit taller it can help with flavor, and that definitely unlocked the flavor for me. thanks for the help with the coil building! cheers from texas!
You’re welcome lost vape 😜
in General Discussion
Posted
do a tutorial