Ryan V

that picture is from last year😄. just joking... after that post, I tried with a single coil setup and everything went fine and the resistance changed whenever I was firing. But then, the "temp protect" error started appearing! everything was fine and the temperature-sensing material detected by the device and my setup was 0.4 ohm and 150c with 30wat power. but temperature protection didn't let me fire. even with a cooled atomizer and ohm remeasurement. Seriously, I've tried everything... I will put the statistics of my new atomizer soon💙

Yes. resistance changes when I fire. but this ohm instability is apparent when I run " Atomizer Analyzer " in EScribe.

I disassembled the atomizer and checked it carefully. sounds like the gold coating on the inner parts is disappearing (wearing out) sporadically and this is causing inconsistent ohm reading which is very important for TC mode. during atomizer analysis, I got multiple different ohms such as 0.381, 0.39, 0.41, and up and down again without even touching the coil or Atty!! fortunately, the inner parts are fully detachable, thus, Re-plating should be a good solution.

sorry! I wanted to say "currently" and not "certainly"😆 that's a huge difference in meaning! English is my second language. so...

maybe there is something wrong with my atomizer... I don't know really; also I tried a single coil and it worked! but now I'm getting a "temp protect" error every once in a while. it's still a question for me too... can I ask which DNA chipset you use? because I think there is something really wrong with 250c, though I can't tell for sure since I never had a DNA device before...

It is definitely ss! I've been using this wire for a while... I tried something else. came out that it is good with one coil build! don't know why! Maybe there is something wrong with my atomizer... certainly, I don't have time to struggle with this vaping computer 😆 but I'll definitely come back for it! there is also something else that I think it's not related to this topic (if you know which topic it is, please comment the link for me) I've started to get temp protect once in a while, especially after I put down my device for a couple of minutes and try to use it next time.

Sure. hear you are... there is something wrong here!🤨 ohm is not changing at all!

Hi everyone. I bought my device about a week ago and tried to use TC with SS 316L round coil, but it looks like the device is not recognizing the coil, and replay mode doesn't work either. I've tried to replace the coils and also tried new builds with different numbers of wraps! No matter what, replay mode doesn't work! It is also worth mentioning that it worked for about a couple of minutes on my first try when I unboxed the device, and also for a couple of seconds on one of my attempts to try a new build and then went again! my coil wire: Vandy vape SS 316L round 26ga My build: 7wraps 2.5mm dual