-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Yol
-
-
1 час назад, Wayneo сказал:
There is already SS316 on your mod. That is fine. Your NiFe48 from zivipf should say what the TCR value is. I have a post about NiFe here to match/help with the zivipf value https://forum.evolvapor.com/files/file/1570-6-nife-material-files-and-tcr-list-for-all-dna-mods/ Use that to create a custom TCR file for your mod. There is also an Inowire profile from someone else. I have no clue about authenticity or correctness.
Thanks for the links! Unfortunately, I could not find information in your post about nife48:( I will try to find myself or somehow apply your settings. And the settings for INOWIRE wire, apparently, are only good for 26GA, not 28GA. But I will try it with them. Thanks again!
1 час назад, Wayneo сказал:NOT TRUE at vaping temperatures. Notice I said low power. Whenever you see shit like that ask what temperature that occurs.
So, i can pre-burn my SS/Nife coil on 5 watts, for example. Then i can snug cotton and block my ohms. Right? I remembered what they said: the resistance of the coil changes, so you can ruin it. Or you have to wait a very long time for it to cool down and then block it. Something like that.
1 час назад, Wayneo сказал:May I ask why you are so against Replay? It's a much simpler way to get dry burn protection. MOST people don't even use TC the way it was intentioned. It has always been 'Temperature Protection', a limit your coil should not exceed. MOST think their coil should rise rapidly to the set temp and stay there.
I just want to try a real TC and compare it to the Replay. And I think the Replay is not as accurate as the "manual" setting.
And I think TC is more than just dry hit protection. I read on the Dicodes website that in TC mode I get less toxic substances, my battery will last longer, the flavor of the vapor is improved, and I can adjust the temperature so as not to burn my throat/do not irritate the throat too much. For me it's about health, to put it succinctly. At least, that's what I think based on what I've read. That's great news to me, especially after the recent scientific research that vaping severely damages human DNA -
15 минут назад, Wayneo сказал:
Do you own those wires right now?
Hello! Yes, i have those wires.
15 минут назад, Wayneo сказал:1. You can simulate a build in steam-engine. There is nothing special OR a spaced build the span of the connectors OR build to an ohm range.
I dont know how, because i see only one wire, what i have right now - ss316L. Nife and 304L are not on the list on website
15 минут назад, Wayneo сказал:3. Absolutely yes. Low power to burn off oils and make sure it's heating from the center out. Plus you get to see if it's got hot legs.
good, but some people write that the space coil from SS or Nife cannot be burned after installation, because something changes there, This is not true?
15 минут назад, Wayneo сказал:Are you a new vaper? Are you new to DNA mods?
I am not a new vaper (i use only vw). And yes, i can say, i am a new to DNA mods
-
Hi. I have a ZQ Essent dna75c mod. There are three types of wire: SS316L (Temco, 28GA), NiFe48 (Zivipf, 28GA), SS304L (INOWIRE, 28ga). I want to try TC on these wires without involving Replay.
What should I do next? What settings should I enter in Escribe? Does anyone have any good ready-made settings for these wires?And a couple more questions:
1. How many turns of this wire should I make for the mtl tank (Neeko rta)?
2. Does the diameter of the wire play any role at all?
3. Can these wires be pre-fired for cleaning?
4. Does the cotton need to be inserted tightly into the coil?
5. Is the TC on the dna60/75 very different from the dna75c/100c?
6. Which wire is the most stable and suitable for temperature control?
I don't know English very well, so the youtube video tutorial I just don't understand. Help me here, please🙏 -
1 минуту назад, Wayneo сказал:
Usually for a new coil, it will show the old and new coil values. If it did that, do you remember the values?
When you remove the batteries or the atty from your mod, it forces the mod to re-read the Ω/temp pair.
Yeah, the mod reads the resistance correctly. The inaccuracies can only be in hundredths or thousandths
-
47 минут назад, Wayneo сказал:
Your english was very good in your posts.
Thank you!
47 минут назад, Wayneo сказал:Keep us posted.
I found another solution to the problem. As always, after downtime, the mot started to issue an error: "no atty". Now I didn't quickly press fire three times to go to the background screen. I just slowly clicked on fire 3-4-5 times, and after that the error disappeared and the mod asked about a new coil
-
13 минуты назад, Wayneo сказал:
No, not for sure. But all is not lost. You can click on the "Help Desk" link in my signature line, create a ticket, and an actual Evolv employee will answer you.
Ok! Thank you very much. I hope they understand my question and the problem
As you could see, my English is not good
-
1
-
-
18 минут назад, Wayneo сказал:
Not a firmware problem.
Is that for sure? Why can't it be a firmware problem if the problem goes away after three quick presses (going into background mode) and a second wait? That is, literally, after that the mod starts to see the atomizer.
19 минут назад, Wayneo сказал:Sounds more like your positive pin on the 510 connector is pushed in a little to far. If you push on it with a screwdriver does it move in and out a little? Does this happen with all atty's? Did this just start happening?
Now I pressed the pin (you have to make an effort to press it). The pin springs as it should.
Yes, this error happens with all atomizers.
Apparently, yes. I can't know this for sure as this mod was given to me by an acquaintance of mine a few months ago.
And yes, forgive me for my English. I am not an English speaking person.
-
I duplicated the topic from the "Report a bug" thread. I hope this is not a problem.
-
After a night/few hours without batteries or unscrewing/screwing a new tank, the mod starts giving a "no atomizer" error. The problem is solved by three presses and going to the background theme, waiting for one second, and going back. And the mod starts to work. Or, this problem can be solved by unscrewing and screwing on the atomizer.
What could it be? Resistance is displayed correctly. Escribe works fine. Is there a problem with the firmware? What should I do?
-
The occasional "no atomizer" problem on the Odin mini DNA75C. After a night/few hours without batteries or unscrewing/screwing a new tank, the mod starts giving a "no atomizer" error. The problem is solved by three presses and going to the background theme, waiting for one second, and going back. And the mod starts to work. Or, this problem can be solved by unscrewing and screwing on the atomizer.
What could it be? Resistance is displayed correctly. Is there a problem with the firmware? What should I do?
Settings for TC on DNA75c for NiFe48, SS316L, SS304L
in General Discussion
Posted · Edited by Yol
Yes, TCR of my Nife -- 400. Thanks!
Hmmm, I thought resistance blocking was the basis of TC. I read reviews on reddit and other resources, and they all block the resistance, "because tc can not work with jumping resistance"
VW are not comfortable for me. For example: sometimes, on the VW I get a very strong throat hit even at 3 mg. The kind that makes me hiccup and my stomach explode with pain (To be honest, on the background of this, I have already had bad diagnoses related to the stomach). And in Replay mode, I don't feel the throat hit at all. I hope the same will be true in regular TC mode.
https://academic.oup.com/ntr/advance-article-abstract/doi/10.1093/ntr/ntad003/7035481?redirectedFrom=fulltext