Jump to content

TeMPe PeTai

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by TeMPe PeTai

  1. Finally able to get my profile unity connected to the mod without breaking the coil. I adjusted the 510 positive pin on the atty. Make it shorter. Then, disassembled the mod. Insulate the the whole wire that comes from the battery to the board with the insulation tape. And wrapped the bottom of the 510 connector together with the wire that goes to the board with the insulation tape. And make sure both wires (one from the battery to the board, and one from 510 to the board) are at distance. Looks good so far. This is what happen before the modification -->
  2. Yes, similar to the 250. I guess having an insulator on top of it should resolve the problem.
  3. Just confirmed that my profile unity is having slightly longer 510 then the others. I don't have the same problem with my zeus... but my kylin mini is having intermittent problem and it's 510 length is in between of the other two. Just adjusted the 510 positive pin of the unity, but haven't had a chance to try it yet. Need to find where did I put my voltmeter first... I plan to dismantle the mod and check if there is any chance of shorted connection... this is definitely a built flaw... None of these attys have problem on my Aegis Solo...
  4. The same thing got into my mind just before I read your message.... I will check once I got home... thanks...
  5. The procedure above works on other tank but my profile unity. The mod keep blowing the coil whenever I screwed the unity to it...
  6. Just got my lost vape paranormal dna250c two days ago. Having the same problem the mod fire by itself. This will happen whenever I changed the atty or attach the atty after disconnect from eScribe. It immediately blow my coil. However, an unnecessary precaution help to prevent this from happening. Whenever I want to attach a new atty, First, I have to press the fire button until it display no atomizer, then press fire 5x to lock the mod, then only I can screwed in new atomizer. Seems like a glitch on the software... Everytime I wanted to change the atty, I have to repeat this procedure again...
×
×
  • Create New...