Jump to content

GyBear

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by GyBear

  1. Just now, dwcraig1 said:

    The voltage of the cell are measured via the balance tap at the bottom of the board. Note for 2S #2,3 and 4 are bridged to positive of cell #2, this is the preferred method. I'm not sure how Lost Vape wired theirs.

    Another way is to bridge batt + with #2.3 and 4, some manufacturers do it this way. 

    I think that you will find your problem with the connection between cell #2 and tap #2 regardless of which way that they wired it. Example would be a poor solder joint, ect.

    2 cell 250C wiring.JPG

    2 cell 250C wiring bridged tap.jpg

    Sorry im bad at english.

    So maybe the solution is, disassemble the device and check the positive connection/wire of batt 2 to the board, right?
    Is there any tutorial or video for dissamble the paranormal dna 250c?

    oh and, where excatly is batt 2 position? (the one that close to the board, with positive in the bottom, or the second one that have positive in the top ? )

  2. Just now, dwcraig1 said:

    What does EScribe Device Monitor show for the voltage of each cell?

    here you go sir

     

    At 1st Picture, its show the battery at 54%, 8V, 4.1V (Cell1), 3.9V (Cell2)

    After a few minutes, the battry drop to 24%, Cell 1 is stay same, but Voltage and Cell 2 got up and down, but its normal again (8V and 3.9V at Cell2)

    And the last picture, suddenly the battery goes to 80%, but the Voltage, and the cell remain same

     

    1396902278_WhatsAppImage2019-06-09at8_42_34PM.thumb.jpeg.b3084c07f525a99510a7bd67a2166fa6.jpeg

     

    244072936_WhatsAppImage2019-06-09at8_42_41PM.thumb.jpeg.3e6455ddbbe20a7ade7623fde4a1c69e.jpeg

     

    250685847_WhatsAppImage2019-06-09at8_47_11PM.thumb.jpeg.3c96a2a3ad83602d769d3d12852441f4.jpeg

     

  3. I've got my Paranormal DNA 250C from a vapeshop near my city. I Bought it at about 6 month ago.

    I got an issue with my Paranormal DNA 250C
    My Battery percentage in my device is detected at 4%, but when im check my battery at a charger and other mod, it shows 100%.
    I have change 4 battery and still, its show 4% on my device.

    The issue started at about 3-4 days ago, when my battery jump from 100% to 80%, 60% to 40%, 20% to 0%.
    I try a couple time pull and put it again the battery, it's always show a different percentage (sometimes it 70%, 60% or 40%), even though my battery is 100% (checked from my charger and other mod)
    Im using Sony VTC 5A

    Now i cannot vaping

    Is there any solution for my problem? 

    Video from another user that have a same issue : Video

     

    Thanks

    155597.jpg

×
×
  • Create New...