Kitsune
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Kitsune
-
-
zark, you're initial assumption is correct. As there's not much information in the EScribe manual, and this is my first DNA mod and there's a lot to learn.
And on 250C chipset there's no boost setting under preheat when running Temperature Control mode. Only Punch, Watts and Temperature. And preheat Temperature is limited to 149°C or 300°F, and yet again there's no information in the manual that is really useful.
But on a positive note, changed to a 6 wrap SS316L 25 AWG (0.68mm × 0.27mm) flat wire coil at 0.32 ohms, increased power to 30 Watts. And are now reaching approx 240°C, so getting closer.
But it would be nice to have a fully updated manual for EScribe, with a full and not cursory description of all options and settings.
-
Well, Punch was left at 5 (default) as this has no mention in Evolv documentation whatsoever.
Target Temperature is 250°C, no issues setting that. But even if I turn Punch off and try to apply a Preheat Temperature of 250°C, it just won't do it. Even tried putting Punch up to 11.
There seems to be a limit of 149°C or 300°F for the Preheat Temperature setting, but why?
-
Hello folks, hopefully someone can help clear up a few issues that I'm having setting up temperature control on a DNA 250C and I'm a novice at using it as this is my first Evolv chipset device.
I'm trying to set my temperature at 250°C, I can do this under profile settings. But Preheat is limited to 149°C or 300°F, and this doesn't help with my coil getting up to temperature.
Also there's not much explanation to Punch, even from Evolv. Shame on them.
So is there a limit to Preheat temperature?
-
Hello Hyperar, may I ask if you've totally disassembled and cleaned your goon 1.5 as well as cleaned the 510 connector on your mods?
As it sounds like you've got a conductor issue.
Goon 1.5 Ohms Jumping on 250C
in General Discussion
Posted
Your welcome @Hyperar, at least things are getting there for you. Hope that you finally nail it.