Jump to content
Evolv DNA Forum

Monir

Members
 View Profile  See their activity

  • Posts

    21

  • Joined

  • Last visited

 Content Type 

Posts posted by Monir

  1. DL and MTL Settings

    in General Discussion

    Posted

    no its not fine at all my advise just change the juice to free base nicotine with 6mg or 3 mg nic bec the salt nic is really heavy on the 0.5 pod ,i migh be wrong but this is my expericene just check and tell me i used to use the salt nic before and i tried the free base 12 mg and it was really harsh so best thing is 6mg .

    but direct lung with salt nic is not good at all for you 

  2. DL and MTL Settings

    in General Discussion

    Posted

    what you are saying is very confusing by the way as mtl should work fine with the 0.5 pod and also the flavour.

    so if you want dtl use the 0.25 pod and dont use salt nic

    for mtl i am using the 0.5 but with free base nic not salt nic and the 6mg with 50 pg and 50 vg with the normal setting on escribe i use the lowest one the blue colour and its fine with me

    there are some people saying to change the setting to 0 warmth and replay 1 you can try it also

    thanks 

  3. PLEASE HELP - hate the orion

    in General Discussion

    Posted

    hi,you can use the nic salt with the 0.5 only not with the 0.2.

    0.5 is mtl and 0.2 is dl.

    so my advise use the 0.5 with nicotine salt and try not to use 50 mg reduce it to 25 mg then shift to free base nicotine 6 mg or 3 mg with the 0.5 coil.

    use the minimum setting the blue colour also you can play with the escribe setting and reduce the boost to 0 and the replay mode to 1 this will let the pods lasts longer but i am not doing this bec i always feel something missing.

     try also to use 50 pg and 50 vg 

     

    hope that i helped you

  10. Getting burnt taste too soon! Help quik

    in General Discussion

    Posted

    hi which coil are u using?go to the setting and reduce the boost to 0 and replay warmth to 1 it should be fine but for me i have to change the pod after 3 or 4 days but i consume around 1000 puff which i think its good to change the pod after 1000 puffs  and i am not reducing the boost and warmth as when i changed them i felt  that the hit is not good especially with the 0,5 coil it worked well with the 0.25

  11. Computer not recognizing DNA GO

    in General Discussion

    Posted

    Hi.please make sure that the cable is connected sometimes u need to remove it and plug it again and sometimes u need to close the escribe programe and open it again.and make sure that after u hear this ding to press the connect button in the escribe programe.if all of these didnt work plz change the cable as i heard that it might not be data cable and it could be a charging cable only

  12. Replay Warmth Option - some checks

    in General Discussion

    Posted

    9 hours ago, ArminF said:

    I can just tell you my discoveries and feeling i made with the Orion. Is is not for MTL as the pods do miss some design changes to cover the MTL settings.

    A coils burns when the liquid transport is broken and or the heat is too high.  Reduce heat/wattage and open the airflow to a minimum to 60%. 
    You can also try to unscrew the tank cap and wait a minute then put it back on. If the next draw is good you have a liquid transport problem.

    Also create a profile with less wattage and no boost and start using this at the beginning when you put a new pod in. 
    Later you can switch to a profile with more wattage and boost. 

    Start with 8 watt no boost no warmth
    later maybe 9 watt 2 boost 2 warmth

    and so on. You need to try. And yes it will cost pods.

    I will take a while and some pods until you find your settings. Took me a while as well. 
    Also your liquids plays a big importance. Clear liquids will last longer as creamy, nut, custards.

    The Pods using the same wire and wraps. The 0.25 is parallel build and the 0.5 has a single build. So you can use actually the same settings on both of them.
    It is not nicotine related as more the flavors in your liquid.



     

    I used the second 0.25ohm with boost 0 and watt 9and warmth 1 its fine now thanks alot.do u recomend using the replay button?if yes what will happen if raised the warm to 3?

  13. Replay Warmth Option - some checks

    in General Discussion

    Posted

    5 hours ago, ArminF said:

    I can just tell you my discoveries and feeling i made with the Orion. Is is not for MTL as the pods do miss some design changes to cover the MTL settings.

    A coils burns when the liquid transport is broken and or the heat is too high.  Reduce heat/wattage and open the airflow to a minimum to 60%. 
    You can also try to unscrew the tank cap and wait a minute then put it back on. If the next draw is good you have a liquid transport problem.

    Also create a profile with less wattage and no boost and start using this at the beginning when you put a new pod in. 
    Later you can switch to a profile with more wattage and boost. 

    Start with 8 watt no boost no warmth
    later maybe 9 watt 2 boost 2 warmth

    and so on. You need to try. And yes it will cost pods.

    I will take a while and some pods until you find your settings. Took me a while as well. 
    Also your liquids plays a big importance. Clear liquids will last longer as creamy, nut, custards.

    The Pods using the same wire and wraps. The 0.25 is parallel build and the 0.5 has a single build. So you can use actually the same settings on both of them.
    It is not nicotine related as more the flavors in your liquid.



     

    Thaks alot for  ur reply

  14. Replay Warmth Option - some checks

    in General Discussion

    Posted

    Thanks alot for ur reply what do u mean by this 

    Plus you can use the warmth option to get more nuances of the liquid out.

    and if i want to use the 0.5 coil as direct lung i have to go to escribe and press the direct lung botton ?

    Sorry for these stupid questions but i got one and just used the preloaded settings and burnt my 0.25 ohm coil in 2 days using normal nicotine 12 mg 70 pg 30 vg so i m really stucked i feel it harsh so i lowered the direct lung now using the 0.25 ohm to 9 boost 3 so it will be good if u tell me ur recomended setting i just need a flavour and the pod lasts me atleast one week .thanks

  15. Orion: Fire Cut Out Time

    in General Discussion

    Posted

    On 10/24/2018 at 7:45 PM, taylord22 said:

    Hey everyone...having a couple of issues with the Orion. The .25 coils have been a completely bipolar experience for me, and neither has been positive. I'm either getting really burnt hits, or, really weak hits. Went into the settings and reduced boost and tinkered around with Warmth. I've gotten about 60% to the hit that I want, but, the device cuts out (even when not on REPLAY) before I can get anything satisfying; therefore, I haven't even gotten to a point where I've wanted to "replay" any hit. 

    My questions: 

    1. Is the DNA GoBoard set to cut out after so many seconds? If so...any way to change? 
    2. If it's not, and I'm positive REPLAY is not on, any ideas? A setting that I'm not realizing might be governing the effect? 
    3. Also curious about any similar experience with the ORION vape experience and what people have done to solve 
      
      Best settings I've been able to come up with (after tinkering with both profiles). Not looking for a "hot vape", just a warm one. 100% of my pulls have been "cold".  Wicking hasn't been great, but I don't think it's the driver of my problem (despite getting burnt hits when using default settings).
    4. 1404571835_ScreenShot2018-10-24at10_40_17AM.thumb.png.ffebe75ab5ae0edcedd1617c1215e86b.png

    Hi can you please tell me ur experience i am facing the same issue Is the DNA GoBoard set to cut out after so many seconds? If so...any way to change? and i didnt find the safety tab to prolong the puff time.

  18. Best pg vg ratio for both coils

    in General Discussion

    Posted

    4 hours ago, formula 1 said:

    i wouldnt say this isnt a matter of what coils suit what ratio mix of juice but its subject of taste usually more VG would be less flavour but produces more cloud , that's why most juice is made 70 / VG - 30/PG this ratio seem to be a sweet spot for flavour and cloud production - remember the more PG you have carries the flavour better but also gives you a harsher throat hit .. what wattage or coil is nearly irrelevant but in my experience if you want a very clean sort of pure taste i would try stainless steel 316L or some say 317L the resistance is down to yourself - i normally vape between 40 to 65 watts on dual stainless steel round about  0.2 to 0.25ohm - nichrome wire is also another i use 

    Thanks alot

  20. please help

    in General Discussion

    Posted

    hi all,please i would like to know how long does an orion dna battery lasts using the 0.25 coil and replay mode.coz mine i feel it doesnt last for half a day and i am not vaping that much.plus when i put in the charger it chrges then within 45 min it reachs a green colour then blink then stays constant with green colour id it normal??

  21. New orion dna

    in General Discussion

    Posted · Edited by Monir

    Hi all,

    i am expecting to receive a new orion dna kit tomorrow .i need your help i am planning to use free base nicotine 12 mg 50 pg and 50 vg as MTL so please advise which coil do i use and which settings ?and do i have to  set it manually thru the escribe as i am not good in tech.and what is this replay  button i really dont understand it i kept reading and till now i dont understand.

    thanks alot

×
×
  • Create New...