french
-
Posts
17 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Posts posted by french
-
-
Hello, it's good, I unsolder my connection and fix directly on the screw fixing the body, I scraped my top battery cap, I empty a tank and it works, thank you dwcraig1, very good service after sale, and long life to EVOLV
- 1
-
The problem is back, tomorrow I dismount the box and I look at the problem of gnd and body mass, I'll let you know, I think the problem you talked about contact must be hurt;
-
I cleaned and recovered my battery cap, I found a piece of plastic hidden under a cap by cleaning with a cotton swab and walking, I thank you very much. on dna my favorite chip, I hope the problem is solved, thank you again
- 1
-
am going to look at this or can connect the gnd on - pin, which is odd is that it worked originally without gnd connected
-
I ask myself if the cutt of the battery is too low, 2.75V set by evolv
-
Everything is well connected, the box worked well when I buy it and suddenly it does that, I change the chip and it remakes the same problem
-
2,76V
-
I vap kanthal and no TC ,and thank you for snipping tool
-
-
-
-
I set as the file
-
can you explain to me how to record my fire curve in monitor system, when I record it gives me exel-shaped table,thank
-
Hello, I just changed my chip, when I fire my battery gauge weakened, I vap 15W and falls to 5W, there is a problem, that's why I changed my chip, how to fix the problem, thank you
-
HELLO
thank you, I had a problem, I can not get down the cut of my battery to 3V with analyze battery on escrib, I've all tried my chip cut of the battery at 3.9V, I vap on 1 OHM at 15W, so I was wondering what's the problem? if anyone could help me and thank you again
-
HELLO I acquired a xvostick 60 for over a year, I will replace the chip, my GND terminal is not connected only my terminal B- is connected to - the battery and the body of the housing and the connector - pin510, does this pose a problem? GND IS CONNECTED TO B-? THANK YOU, thank
dna 60 (power increase alone)
in General Discussion
Posted
Hello I have my bbox dna 60, the power goes up alone, I remove the cap of + - switch, but I do not see anything, have you had this problem thank you