Jump to content
Evolv DNA Forum

DMAN

Members
 View Profile  See their activity

  • Posts

    35

  • Joined

  • Last visited

 Content Type 

Posts posted by DMAN

  1. How to set up a DNA properly ?

    in General Discussion

    Posted

    14 hours ago, Lanzarotechris said:

    @asmcriminal

    Actually I can't even remember what I've tried and what not... But I am running at some decent temperature around 220-240°C.

    Shouldn't interfere with Replay, because Replay and TC are 2 seperate things... And I like TC because no dry-hits and the material (coils, cotton) works longer.

    That's why I also switched to use mostly SS coils.

    But I am getting to the point where I get used to the Triade and get a feeling about the settings... and the advice here from the forum helped a lot too.

    Definately not a device I would recommend for starters, thats for shure now.

    I want to write some kind of summary here in this post, but at the moment there are too much other things I have to take care of in real life, and also I still have to figure out some more of my 13 Atomizers on the Triade 😉

    In the moment I just have 2 or 3 that work as expected. So not the end of the road yet, but I can see it in the distance 😉

    Totally disagree with your opinion. Replay enabled devices are perfect for starters/newbies.

    Find a vape you like, press Replay. Sorted.

  2. I have yet to find an atomizer Replay does not work on...

    in Replay and Atomizers

    Posted

    2 hours ago, dandiele said:

    Just got my paranormal dna250c and so it doesn’t work on a falcon with f1 coil, a Valyrian or a uwell nunchaku. Kind of a bummer because I know for sure at least one of those uses a section of non resistance wire to the actual coil and that should be sufficient I thought for replay. Not gonna run around town buying coils / tanks to find one that works lol

    Replay will only work with TC wires. In a fancy coil, the core needs to be a TC wire.

  4. "Throttling"

    in General Discussion

    Posted

    Probably unconnected, but I had a similar problem using Replay. The power kept switching off and on through the vape. It was jumping all over the place.

    It only happened with the one atty, so I knew it wasn't the board.

    The atty was the Vandy Vape Triple 2, so a fairly crowded deck with 3 coils. I had carelessly added an extra wrap to one coil.

    I removed the extra wrap and all was good.

  5. How to set up a DNA properly ?

    in General Discussion

    Posted

    28 minutes ago, Darkstar_ said:

    Just to add to this thread, I agree with the above, somewhat.

     

    But what isn't clarified is how far you can go. Based on what you said, I decided to up the temp in replay mode, above what is recommended for the coil. So now for example I've upped it to 300 degrees c which is 572F. Above what the coils can take, but it gives me a good vape. I guess it is about having the "guts" to just do as you say, up the power until you get the hit you want. Don't pay attention to the wattage limits, I'm sure the mod will keep it safe.

    That's what I do, I trust the chip to sort things out.

    When I build a coil, or use a stock coil, I have a rough idea what power it needs. I start low and up the power until I get a nice vape then Replay it. It doesn't matter to me if Steam Engine says it needs 85 watts, i'll run it at 60 watts if it vapes fine, or go past 85 watts if needed.

    I guess it could drive you nuts if your the type that needs to know exactly how something works. :)

  7. How to set up a DNA properly ?

    in General Discussion

    Posted

    4 hours ago, Lanzarotechris said:

    you're absolutely right ;-)

    But to elevate you to our level of discussion,... we were talking about the effects of TC, Preheat, Boost and Punch and some other options which changed the outcome of that vape.

    I will leave you to your elevation. You are too high for me, I just want a nice vape.

  10. Hugsvape Lotus RTA. Replay not working.

    in Replay and Atomizers

    Posted

    Yeah, same settings.

    I think it's a 510 pin issue. I almost got it to work on one of the other mods. The 'save puff' was there, but the draw after that was a horrible dry hit after I saved it.

    I don't really care about this issue, so don't spend any time trying to figure it out mate. I just posted about it to put the issue out there.

    The atty is a cracker, and it's worth buying no matter if you use it in Replay, TC or Power mode on any mod. It's almost impossible to get a dry hit because of the floating deck.

  14. Won't turn on from deep sleep

    in General Discussion

    Posted

    4 hours ago, clivy said:

     

    The fix release wont be long now  and evolv is on top of the problem

    My paranormal 250c has gone 4 days now without a problem so it is just a matter of any final touches needed before release, just be a little more patient, remember the last thing anyone wants is for a fix to be released that is not perfect

    Same here. Mine is also working perfectly now, so the general release of the firmware must be imminent.

  20. Won't turn on from deep sleep

    in General Discussion

    Posted

    7 hours ago, Chrisvail42 said:

    My paranormal dna250c was doing the same thing would not wake up after a deep sleep. I sent in a ticket and was told to send them my device. Evolv has had my device since June 8th and today they told me that they believe it is going to be a firmware fix. So FYI Maybe if you don’t want to be without your device for a couple weeks you guys that haven’t sent it to evolv yet can wait for a firmware update??? I’m not sure but they still have mine and I will post back here when I get it back in my hands. 

    That's good news. Mine has this fault too, but It always switched on eventually. I was considering opening a ticket, but will hold off for now.

  25. Vapecige 250c no Replay

    in General Discussion

    Posted

    I clicked on 'restore defaults' and it has wiped out the Vapecige coloured graphics. I now have the same blue graphics as the Paranormal.

    I've now got the Replay screen, but 'check battery' keeps on flashing every time I press something!

    I'm too old and non computer savvy for this stuff. I think i'll send it back as not fit for purpose.

    Thanks for your help retird, but I just want something that works.

×
×
  • Create New...