-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by ModBox
-
-
I.R. is .004
-
Not locking ohms.
-
I just went through tcr modes and these coils will fire on Nickel 200 and Titanium. I do not get temp protect message in those 2 modes.
-
-
I have tried a simple 8 wrap 3.5mm id ss316l with no luck. Still get temp protect in tcr. I tried spacing the fused clapton coils with the same results. Think I will source some different ss316 wire and give that a try. But may have to send this mod back and let him take a look at it.
-
@Wayneo those numbers were from the device monitor. I am using The Hive RTA by CCI. I also tried the Icon RDA by Vandy Vape with no luck. I tore the Hive completely apart and gave it a good cleaning a few weeks ago. Great tank by the way. I need to rewick it. I'll try playing with it unwicked to make sure no hot spots again. I'll try a simple build on the Icon and see if that helps any.
-
I'll try a simple build possibly tomorrow and see what happens.
-
No hot spots. Cranked on post screws. Could the wire be the issue?
-
I have a Mad Modder Mod with DNA 250C chip with 4s lipo. My build is Lightning Vapes SS316L 2 core fused clapton 26g/36g 8 wraps non spaced 3.5mm id. Cold ohms is .34 and live ohms is .27. I cannot get tcr to work in SS316 mode. I always get temp protect message. Also, when I play replay, I get check atty message. What do I need to do to get these modes to work? I have tried different atomizers as well with no luck.
Help
in General Discussion
Posted
I was discussing this with the mod maker. He said to return it to him. He just got off the phone with evolv. The anodizing on the 510 is causing a ground issue. Good guy Mad Modder is.