[Does Therion 166 support below 0.1 ohm]

3 minutes ago, retird said:

In actual device settings you use the wattage is important in TC ..... too low of a wattage setting and preheat is effected and the set temperature may not be reached....

Do you have any idea How many wattage I should use?

[Does Therion 166 support below 0.1 ohm]

According to ohms law, it seems safe. However, I don’t see the use of putting there my desired wattage since it’s irrelevant in TC. 

[Does Therion 166 support below 0.1 ohm]

I’m using 26ga ss316l for a month and using it in TC mode as it supposed to and I get aroun 0,26 with 7wraps(dual). If I use the wire in the image, will it be safe and does ohm matter in TC mode? Thanks in advance. 

 

P.S.: More wraps than 8 doesn’t fit my atomizer and I assume as fused claptons more than 6 will be too big for it. I own a Pilgrim GTA.

Also, I did a little research and it does support 0,08ohm+

[My first DNA mod, looking for simple mod and related advice.]

I have a therion 166w with dna 250 chipset. I use tc mode which works awesome with this device. One disadvantage of this mode is the letters on it gets erased so quickly. I’ve been using it for more than a month. 

[Ohm not changing]

41 minutes ago, Wayneo said:

Somehow the 0.006 doesn't make sense, however, did you remember to 'upload to device' after this or any escribe change?

 

11 minutes ago, giz_60 said:

.006 is the default value that Escribe applies as a TCR value....as long as you uploaded the setting to the device as .00094, you will be good to go...

Thanks guys. Have a good vape 🤗

 

How can I mark this as resolved?

[Therion 167/DNA250 0% batteries check]

Is this a new device or were you vaping with it?

[guys pls help me my therion 167 i cant open it even any batteries it dont work thanks for your answer]

Download escribe. Options, User Interface - Manufacturer. Go to Mod and change your cells type accordingly.

[Ohm not changing]

Thanks for all of your answers. I have another issue about the escribe program though. I always save my TCR for SS316L as 0.00094. However, when I re-open Escribe, it resets to 0.006. Why?

[Ohm not changing]

8 minutes ago, Wayneo said:

The displayed value is the 'cold ohms' value at 70F and will NOT change on your mod display like you imagine. Device Monitor will show you it's changing, or vaping in regular wattage mode will show it. Perfectly normal.

Thank you very much! Have a great day!

[Ohm not changing]

Hello everybody,

I'm new to TC vaping and before I start, I made some researches. IIRC, the ohm should change while I'm vaping. However, I see no change at all with my dual 0,3ohm, ss316l, 26ga wire. 1,5s preheat 70w and 45 normally.  I'm using Pilgrim GTA if it helps. Also, I may lock that ohm by mistake through escribe. How can I revert it on my mod. 

 

One more question, what is the range of vaping with this build? I feel like the more temperature the more I like. However, I read that fruity juices should vape at lower Temperatures. Thank you all.