Jump to content

Voodoo71

Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Voodoo71's Achievements

New Member

New Member (1/3)

0

Reputation

  1. Help required as i didnt save the original settings for a Hugo Vapor/Yoko Vape TRX167 when i used the hard reboot function while exploring escribe. Its basically not going into deep sleep as i dont see any welcome screen when i pick it up to use in the morning and also acting weird with the screen coming on ready to fire without being touched. Ive reset escribe defaults and the battery bar shows as empty, i know its in 250/3 cell mode so i change to 167/2 cell with hg2 curve and cutoff 2.8 but still misbehaves. I had originally set it up with the following: 3 click lock/unlock, themes in my coil presets with 2 additional welcome/ my name screens both to display for 3s, 30 secs idle on screen options, i had played with the charging brightness so i could monitor charge but reverted back to 0 as i charge batteries externally. But still no deep sleep, is it a bug in the options im using or hardware? Otherwise its performing fine with power and temp modes.
    Loving the look & feel of this theme, makes me want to create a theme based on this landscape, Thankyou for sharing Vapedroid
  2. This explains alot because the base of my black vt75c got hot right where the right hex screw was if you had the screws across the top looking at the base. I took off the bottom plate and adjusted soldered contact and that seems to have cured it. But now i feel i have to dissemble the whole mod and make it safe! FFS first hcigar product will prolly be my last, guess the chip needs to go into a DIY box now, shame i like the feel of the hcigar. Just seen mrcrunch`s post so maybe my base wasnt as secure as it should`ve been neverless this is poor manufacturing housing a quality chip.
  3. I Second the iJoy 26650 getting warm quite a few times and the one time it got really hot i inspected the baseplate were the heat was originating from, basicaly looking at the bottom of the mod with the two hex screws across the top, the right one has a earth connection soldered to it inside, this solder looked like it was making a contact where it shouldnt be or mentioned before some high resistance issue. I moved it slightly and reassembled and seems ok atm but im not 100% comfortable using this a daily. Hcigar i hope you read this "we dont need to give the FDA any more reasons to mess up the scene"
×
×
  • Create New...