Nicolasan

With the 2 days Replay vaping session i had, i think Replay Mode in VW is not really TC (we have no temperature references while vaping). It’s just a very simple way to get a similar vaping experience. And it works. It’s crazy how good is the vaping experience! Unbelivable! But it’s not TC! You can’t know the real temp of the coil (using coils/wires with very high TC precision is helping to get a very, very accurate results. Very close to the real temp). Using materials with tcr not certificated has probably got no sense anymore because my impression it’s the vaping quality it’s much better with Replay mode/power mode. But using a wire (with high Tc precision and an accurate and certificated .csv to use with it) with a tc profile in replay mode has got a sense for, at least, 2 reasons (imho): -you will have Temperature references in your puffs data sheets. Quite important for me to know how the coil is working with the atty i’m using and to understand what’s wrong with that set up (you know, there is always sothing wrong, something we would try to get a batter vaping experience with next set up!) -the replay mode is not a tc mod. In a tc mode we couldn’t get always the same kind of vaping from all puffs! Expecially with squonking mods it was quite hard to get because the puff result was influenced by the quantity of juice into the coil (hard to control just wit a squonk!) and the temperature settings! Now we can get same kind of vape with every puffs using the TC ad well! That’s the Replay in TC! That’s it. And it looks working fine as well (very much influenced by the tc settings of the saved reference puff and by the material used) and i’m glad Evolv added it because i use to study my coils basing on reaults i got in tc mods! I would like to have a bit more infos about how to use correctly the warmth settings and i’ve the impression they are changing automactelly if we are using the replay with a tc profile. Is that impression correct?

Don't know if it's a little bug and don't think it's affecting the correct run of the board.I didn't test the latest release but once I set the mod resistance, it's resulting saved with a +0.0001. In my case, I set it as 0 and I used the signature tips tool to calculate it (0.003) with the atom analyzer. I put and saved to the mod that value and after the saving EScribe is showing 0.0031 ohm.

With the SP22 Beta2p2 is much better but still have some problems. Expecially if I leave the Device in stand by for long time. About the Room T something is wrong! Sometimes (expecially when connected to EScribe) is corresponding. But on other moment, like now, with the device not used during last 10 minutes(and the device is not warm at all) it's reading a 35 Celsius against a 25 real room temp! Tryed a couple of time the Case analyzer but not changing a lot! Any news or next firmware releases coming?

I think the DNA75C is making a sort of refinement otherwise it's not so logic you have there the option to block the ohms lecture! But using it the value of the resistance red is not update as before? Is that possible? I've also a friend testing it and he told me, one time,while in use the device asked if it was a new coil (always same coil, a ss316l in tc mode if i remember well) without unscrewing the atty from the DNA75C device! Can it be cosidered as a proof of refinement ?