[Just got my paranormal 166 want to get 316l for tc any help]

On 12/24/2017 at 7:54 AM, Wayneo said:

So on your Paranormal, you unscrewed the 510, cleaned off the loctite, and it's now working fine? Did you verify that in Device Monitor? Using any TC wire your coil resistance will always rise, BUT YOU SHOULD ONLY EVER SEE THAT IN DEVICE MONITOR OR IF TC IS NOT WORKING or you're using just watts. Read that two or 3 times.

For your Oni

what straight watts have you vaped this at, and find good? What are your Profile settings for this (Preheat Power, Punch, Time) and then Power.

Screenshot instructions in my signature line.

There was no lock tight on it it was just a loose connection 

 

Oni uses identical shit as the paranormal. So any Intel I give for one vape I applied to others.

 

Also fun thing my paranormal was charging overnight on the USB port onboard and now won't fire up so I've had it with this piece of shit it's going back. I've had nothing but issues with lost vape products and they are just shit from my experience. Their product failed their performance review but they look nice but that's it

[Therion DNA 250 166W - (Check Battery)]

Same issue with lost vape paranormal 166 but interesting twist push and hold power/fire button and device Powers up but says check coil(no atty) or check batteries let off fire button shuts down

[Just got my paranormal 166 want to get 316l for tc any help]

well looking at that quick fix i thought id take a look at the settings and well im sold, because now running 6 wrap stainless 316 24GA twisted with a 0.635 twist is now working perfectly in the sherman RTA and the combo/ijoy RDTA.

 

im now wondering if there is a simular fix for the the oni 167 because that worked perfectly. the 510 deck was a 1/2 turn off therefore no solid connection... who knew that these things are damn near rocket science to fix

[Just got my paranormal 166 want to get 316l for tc any help]

16 hours ago, Wayneo said:

"LV Paranormals have issues...https://forum.evolvapor.com/topic/69140-paranormal-75c-resistance-too-high-fix/

... but the problem seems to persist across all Paranormals"

@VapingDad I'd suggest you read the thread listed. 1st post and the last 3 posts.

For your Oni, can you describe your coils, and a Printscreen (Device Monitor) while firing would help.

Well, none of the shops I frequent have any clue about temp control either, and voice that opinion based on selling non DNA devices. 

coils are fused clapton stainless steel core 24g wrap 30g, 6 wrap on 3mm wrapping tool. rated at 0.17 ohm. i will also look at page 1 as for firing in device monitor it doesnt even detect the coils as temp just watts.

 

update my computer doesnt do screenshots

[Just got my paranormal 166 want to get 316l for tc any help]

On 11/2/2017 at 5:39 PM, Dtgodmage22 said:

Reload rta I updated the settings and it works but still pops up time to time everything I tight as can be hearing even no hot spots

 

So ssl isn't recommended for wattage mode at all or what that is what I've been using it in till someone can give me good settings to try the ones I tried hated the flavor and wasn't hot enough 

 

No matter what I try it just says temp protected and won't go away 

Ohms up to .45 after one draw dropped to .33 when cold

So what am I doing wrong

 

Coil building tc escribe is all new

according to my local vape shop building in temp control its one touchy item to work with. i too am having issues

[Just got my paranormal 166 want to get 316l for tc any help]

On 11/2/2017 at 2:50 PM, Dtgodmage22 said:

Not sure what I need to do tried 316 and just says off when I vape puts me back in wattage

 

Using 316l Clapton from us 6 wraps 2.5id ohms about .34 shoots up in .4s when vaping

 

Wouldn't know what settings to try normally vape at 70 to 90 2 3 second draws

 

Got 316l in there set at 25 watts 450f preheat 70 watts 1 second all I get is temp protected 

im having the same issue and its pissing off me and my local vape shop

On 11/2/2017 at 3:36 PM, giz_60 said:

What atty are you using?

im using the Sherman Tank RTA by Asylum mods. its a great tank but temp control does work ONLY when the coils are dry for some strange ass reason. if anyone can assist with this also as for the screenshot of the device monitor, the device fails to read the actual temp of the device. screen on the dna states "OFF" i get 3-4 drags when its on 410*F so im using it basically at watts till anyone can get a perminate fix. i also have the same issue with a ijoy/combo rdta on an oni 167 ive started to come to the realization that the dna chips are just garbage. sure you can mod the themes and make it look fancy but big whoop if a device thats advertised for temp control and you go to use it in that way but nope good luck hope you like having a device not work for that setting

[New Users - Come say "Hello"]

Just now, VapingDad said:

SS316L Fused Clapton 24*2+32

What's best???

[New Users - Come say "Hello"]

On 4/8/2016 at 8:59 PM, CptSmoke said:

btw what is everyone using for temp. mod ? SS / Ti or Ni ??

SS316L Fused Clapton 24*2+32

[Vault Tec Theme]

On 6/11/2017 at 9:08 AM, dclanz said:

It looks pretty decent and as I'm currently playing Fallout 4 I'd love to try it out (once my new DNA 250 arrives). Suggestions include: using the mysterious stranger in VATS mode as an indication for stealth mode, different character images for different coil/wire modes (raider for stainless steel, ghoul and supergiant etc). Keep it coming, let's see what you've got.

Thanks for the extra ideas, sorry it took so long to get back to this I recently upgraded my mod to another DNA 250 but I've just been way to busy with work to even think about or having time to continue with the project.

[Problem with date !!]

On 12/18/2017 at 6:57 AM, 67exec said:

Mine rolls the date back a year every time I change the battery, it showed 2014. Lols

Maybe in 2014 battery changes it's the end of the world, the way your wording what's happening is that Everytime you change batteries you go back a year like a count down. 

[Ohms too high]

On 12/16/2017 at 2:02 PM, Edgar said:

It’s said 7.something but they’re preñase coils that come nowhere near that and I was using before just fine

So your DNA is stating that they are at 7.xx but are they rated for something closer to the 5.xx mark I believe. If this is the case I'd tighten down the coil(s) and the 510 pin. Also check if the spot where you thread in the atty is wet that can and will cause issues. I build my own coils and I have a little difference in ohm reading 

Coldcoil 0.15

Warmcoil 0.16

Hotcoil 0.17-0.18 

It's a minor increase but it's liveable now if jumping from 5.0 - 6.0 then that's a whole ohm going out of whack which could be the atty, coils, mod or all the above I've had that issue with kanthal wire but I rarely get it with stainless.

[no flavour ss4?]

On 12/16/2017 at 3:13 AM, bootsy said:

thak yo u  for the reply a fo ery helpfl thank you, only t got th na250 loing it o far hae hae arna  60 for a hile

No problem, also I recommend using escribe for working and tweaking the dna it's easier to change multiple profiles with ease with escribe

[Problem with date !!]

These things know the date??? Cool.

[dna75 lost vape draining batteries]

Also send them your complete mod profile so they can replicate the issue. Should be in the general tab

[DNA 75 stuck at 75 watts.]

On 10/30/2017 at 1:34 PM, Karl C said:

Thanks, I'll give it a look. The buttons do all click perfectly tho. In the meantime, Ive replaced it with the colour model

 

Did it work if not connect it to your computer in escribe and memorize the battery stuff or screenshot it then factory reset it.

Please do this at last resort because you will definitely loose everything

[Ohms too high]

3 minutes ago, ChunkyButt200 said:

What are the ohms reading on the device when you fire it?

Also what are your standing(cold oms(quick press(tap)the power(fire) button)) you may just have to tighten the coil posts and/or the 510(center) pin

[dna 250 battery help]

Thanks I went to my vape shop and downloaded all battery profiles from them.

[20 Second Limit]

In the escribe software I think in device monitor you can override all puff limits but only for testing purposes (while connected to computer I do that on mine but I select 1-3 sec testing limits to not burnout cotton if your dry firing on the other hand it works as long as you want just try not to add too many 0's as you don't want to inhale for an hour or something lol

 

This is in the GUI version that I use of escribe

[no flavour ss4?]

SS is an abbreviated term for STAINLESS STEEL  the most common kind of SS I've seen is ss316.

 

To change materials lock your mod (5x click on power(fire) button) now press and hold fire,+&-. (All buttons) for about 5 seconds then use + or - till you see ss316 which is commonly preloaded into your DNA. If it's not in there I'd recommend finding the correct file or if you can wait till the end of the day I can upload the file for you as I've already acquired the ss316 profile. 

 

Hope that helps

[Emergency help needed]

Sorry for the long ass post. The two main errors I get are "oms too low" & "short out" and yes I have checked the shit out of the batteries they are brand new

[Emergency help needed]

Hi everyone,

I just bought a lost vape paranormal mod and the Sherman tank RDA to upgrade my style from the ijoy RDTA on the starrs 168 neochrome both use the 250 DNA chip. 

 

Now here's my strange issue. Got everything built on the Sherman 7 wrap with ss316 (Clapton dual core) the whole dry firing worked no problem. Do the wicking and test firing and now my paranormal is stating that there's low oms, and it's shorting out there's lots of clearance around all the coils so that can't be the issue, I checked the 510 pin on the vape still nothing. Now here's where things get a little interesting. I put the Sherman from the paranormal to the starrs neochrome the Sherman works with no issues. The ijoy works nicely on the paranormal.

I want to know why it isn't working when I want to use the paranormal mod with the Sherman deck because they look beautiful together.

 

Coil build: 2x SS136 dual core Clapton on a CW30 (3mm) 7 wrap readout reads between 0.17-0.22 which my local vape vendor has assured me is normal.

 

If anyone can assist me with this issue it will be greatly appreciated. As I don't want to send it back to the lost vape company.

[dna 250 battery help]

hi i have a starrs dna 250 vape and im having a little trouble with the battery specs. I use 2x 18650 at 2500 mah, with 3.7v inserted i think, how do i get or make a csv file for those batteries.

 

any and all help will be thanked.

i already know about the mod tab, and the what-hour calc i need a discharge profile for my batteries, they are all the same they are 

INR18650-25R

SAMSUNG SDI

5               2G93

at the top they have

I1C7, J5G9 49C41

That is all the info i have on these batteries i just need help getting a discharge profile that is accurate and a good soft cell cutoff im currently set a 3.20V for the cutoff

 

please help what you can thanks in advance

[DNA75C Theme Star Trek LCARS]

not bad, i think its easier to program themes if you own that kinda vape to test it and make sure it looks good, im more experenced with dna 250, hope they make a color screen for that chip

 

[Vault Tec Theme]

lol whoops well its my first time using this thing didnt know how it really worked

[Vault Tec Theme]

the theme that I'm slowly working on with inspiration from some other fallout themes is a pure vault tec theme, i will upload what i currently have they are free to use but please don't steal it as your own that's all I ask

Bootloader

second screen (google for pixel art)

no atomizer 

relaxed mode

main mode

not decided yet (borrowed from gif)

change material

coil cleaner (borrowed cloud)

locked out (borrowed vault Door)

new coil

power control

return to researcher

power locked out (borrowed)

short out (borrowed)

temp lockout (borrowed)

temp protect

overheating (borrowed mushroom cloud)

some of these have been smoothed out and some are fully custom, i'm not saying that i stole any of it and calling it mine the ones that have "(borrowed)" are minor edited like text type, size, or just smoothed out. the ones that are not marked as borrowed are my own creations... if there is one or 2 here that i forgot to mark im sorry.

 

the ones that are marked as borrowed i haven't thought of anything to put in place so its my own theme, if you have any suggestions feel free to let me know.