Jump to content

brettxpmw

Members
  • Posts

    2
  • Joined

  • Last visited

    Never

Everything posted by brettxpmw

  1. I have had to mail my Reuleaux in to be either repaired or replaced and hopefully I can get a response as to what is wrong with the way the mod is reading these cells and why its causing this problem. From what I have found each person to run into this problem has had their mod attached to the computer and as soon as they update the settings they have changed on ascribe this random and very rare problem has occurred and as for it being because of the type of battery and what the cell cut off is, these two possible reasons are not possible because it was fine and never had a problem until the update on ascribe and all I did was change a screen setting on ascribe and boom the problem started from there its happened on two of my reuleaux devices so far and I have sent both in and hope to have more of an explanation rather than just a replaced device.
  2. When I try to charge my Reuleaux via usb it doesn't work so I removed the 3 18650's and charged them from a nitecore dock. When the batteries were fully charged I put them back in the device and the device would not recognize the batteries giving me a Check battery error with the battery icon being empy and when I used escribe to check the cells it is as follows (Cell 1 reads 0.01 cell 2 reads 5.15 cell 3 reads 4.19) and when I swap the place of one battery for another rotating them from one position to the next i get the same reading. when I remove the battery that you would put in last and take out first the first two cells turn to (0.01 ) and the third reads (3.06) which I don't understand since each cell is separate. I am becoming very frustrated with this and it happened all of a sudden after about two weeks of use and everything was fine and all if a sudden this problem started after I tried to charge my mod via usb like I have successfully many of times in the past. If anyone could give me any advice I would really appreciate it. I have also tried to perform a usb recovery charge and i have tried a hard and soft reset of the device nothing seems to work. It doesn't matter what batteries I use or the placement of each cell I get these results and I think the mod is faulty and needs to be replaced.
×
×
  • Create New...