CNJvaper

thank you so much!

oh ok sweet so i have an aeolus 3 post so put them in as if i were mounting regular coils? just make them u shaped. sorry im not a electrical engineer just an avid vaper wanting to learn.

im wondering for the new wismec when you set up the battery setting in the mod tab, how should one set it up? ill be using vtc4 (3x) and vtc5 (3x) and my 2nd set. so lets say for the vtc4 would i put in 2100mah and 3.6v as lith ion setting 3cell or would i put in 2100x3 at 3.6 or 2100mah and 3.6 x 3 as the nominal voltage. i dont have any resistors to run a battery analyzer. thanks for any and all advice in advance

With the upcoming release of the Wismec Reuleaux using 3x 18650's i thought i would awesome to be able to set and access battery profiles on the board by creating them in the MOD tab. that way if im using vtc4's for example which are 2100mah and swap out for vtc5's that are 2600mah i wont have to 1.) get to a computer to re enter the mah of the new batteries or 2) sacrifice and accurate charge meter and battery life by running the vtc5's with the mah set to 2100. this could also be applicable to 3 cell lipo since a lot of new mods are making them accessable and easy to swap out. example being the whiteout by cloudmaker.