Jump to content
Evolv DNA Forum

josh

Members
 View Profile  See their activity

  • Posts

    21

  • Joined

  • Last visited

    Never

 Content Type 

Posts posted by josh

  1. Mac Suppport

    in EScribe, Software and Firmware

    Posted

    blueridgedog said:

    Some mac users are getting inexpensive windows tablets as a solution.  Personally I am just avoiding El Capitain for a bit.  I put it on one test system and like it, but am in no hurry.



    This may be an old thread but I had to comment for the ridiculous wording... Buying a tablet is not a solution. The solution would be Evolv making software correctly, Microsoft Word or Evernote never said "screw other OS's". I accept it may take time, but you cannot use the word solution for that...

  2. how to change the charge settings on escribe

    in EScribe, Software and Firmware

    Posted

    bigcountry817 said:

    FOUND IT!!!!! Alright. In escribe whenever yu get your device connected, go to device manager. there in the bottom right hand corner yu will see a list of boxes and one of them will say diagnostics. click that and then from there you can set the max charging limit and the max current limit. in the charging limit it asks for wattage hours. so put 14. that will change 900mah from typical mods to the vt200s 1400mah battery so when it charges, it charges fully.

    That's how many amps you can charge at... 1 amp is the max supported on dna boards, or 2amp on the vaporshark... Setting that too high can kill your board.

  6. Technical explanation of preheat?

    in EScribe, Software and Firmware

    Posted

    Thanks for the reply Vapingbad. This is how I imagine it to work and understood it to work.

    However if setting the punch defines how close to the temperature it gets why do we set a power option aswell?

    In my head... Power = temperature - raising one raises the other... So how can you set the power and have the punch change the heat temp? If possible I'd love to see two number examples (even if not completely mathematically accurate)

  7. Technical explanation of preheat?

    in EScribe, Software and Firmware

    Posted

    Hello all,

    If using a temperature-sensing coil you can define the preheat. This makes sense and I understand it's purpose.
    It is also very easy to understand the time limit...

    However. if the preheat power is 100w what diference does the punch make? If it's soft does it hit 90w or if it's soft does it take a second to get to 100w?

    Another question on the matter, if the preheat power is 100w and the power setting is set to 50w will it fire 100w for a second then 50w?

    Could somebody explain the exact way it works for my understanding?

    Thanks

  8. Evolv worse than Smok reliability?

    in General Discussion

    Posted

    Well one of them I could put down to an issue with the build... The second one is using a wood box (with no mounting points just the wooden frame to hold it well) 3 vamo buttons on the original buttons... Overall the mod has 4 connections, 2 to battery and 2 to 510 which all look incredibly well done and even if the 510 ones shorted the board should be okay with that and I know 100% the battery ones are fine, so I would have to be extremely unlucky for this to happen twice?

  12. VT200 won't work

    in General Discussion

    Posted

    It could be the fuse... But I've had this a few times now it seems the Evolv boards are rubbish and will just keep breaking... It'll be the nicest mod you'll never use - it will just keep going back... Evolv have cost me over £100 in postage on two mods... + having to wait 4 weeks a time to get a new board

  13. Evolv worse than Smok reliability?

    in General Discussion

    Posted

    So this is my second DNA200 board which has died... No reason why - one blown fuse one not blown... Neither show on escribe at all or turn on irrespective what I try...

    I've heard many rumors about boards breaking and as bad as 11 out of 25 from some people have had faults?

    I've now spent £100 on sending faulty mods back to the builders to be looked at to find out the board just doesn't work...

    Evolv what on earth is going on with these defective boards? It's the most expensive thing I have ever bought with the mount of postage? I want to know why these fail... I mean the first board never had anything other than pre-made subtank ni200 coils which still work on my other devices...

  15. Coil Safety - DNA200 Specifically!

    in General Discussion

    Posted

    So a 0.05 ohm build (for Ni200 TC) at 125w would have 50amp draw, the 0.05 ohm build at 35w would have a 25amp draw...

    Am I right in saying that the DNA200 has an onboard 25amp fuse which could blow if you go over it?

    Also what happens if you go over the amp limit on a 3s lipo?

    As my math suggests bad news I havn't been brave enough to try it but I know people who have but would like to see what Evolv say about the fuse and everyone else about the lipo?

    Thanks in advanced,

  20. Battery Percentage Confused?

    in EScribe, Software and Firmware

    Posted

    Hi,

    I have noticed that on 3 occasions now leaving the device to "turn off" without an atomiser on the device has turned back on with 5-10% battery left, charging makes no difference as it counts up... However, plugging it into escribe and uploading settings brings it back to 50-70% where it should have been...

    This is quite concerning as this could cause issues with charging causing quite a bad overcharge... Has anyone else experienced this? I have had this 3 times, with 2 different batteries...

    Steps already taken:

    • Charged to 100% (12.6V) after setting the 11.66wh (1050, 3s 11.1v)
    I have been unable to replicate this issue consistantly
×
×
  • Create New...