omnipotentduo

I can't figure out how to have my rolo repaired by wismec so I was wondering if there is a part for the 510 adapter. The spring is sprung and in the process I stripped the threads taking my tank off the mod so I double screwed myself. If anyone has a recommended part for replacing that I would be very grateful.

I enjoy ni200 and titanium for TC, however I work all day on nickle and titanium alloys. Please note this statement is NOT to mean nickle and vaping are an issue, but I do want to minimize my exposure to nickel to strictly work at this moment. The second I am done with this job you can bet dollars to diamonds i will be pulling my nickle wire back out. The temps involved with vaping and nickle and the 'paranoia' in the uneducated minds is so misguided its sad. The temps required for nickle to have a chemical reaction are so high at atmospheric pressure, you would need to be able to get nickel into about 1300F. Yeah I'm coming from mech mod, kanger subox and a yihi chip from an ipv so my actual working knowledge of temp control is pretty limited. I did enjoy the ni200 on my ipv4s a lot, but i couldn't get titanium for it to try it, mostly because i didn't put the effort into it outside of my brick and mortar store (I am a fanatic about supporting small local business). I digressed, from my perspective and the general vaping community I am exposed to in my area is very 'what is my out of the box experience going to be.' Thanks to their conveniences such as iphones and things like that. So, most people aren't willing to put in the effort to learn how to adapt to a new device. So, they don't build much, if at all. However if someone does want a more versatile vaping experience I want to be able to suggest to them something like this mod and update the software for them and say enjoy.

VapingBad, that actually makes a lot of sense on a rebuildable, I need to get some SS wire to build with but the only thing i have that runs stainless is a TFV4 coil, but because it does have legs to heat maybe causing my issues. So I wonder how that would compare to a build. Being able to compare the two will make a huge difference in being able to 'tune' for a tank or a dripper. *sigh* switch to vaping it's cheaper than copenhagen they said. They never warned me I might turn it into a hobby and become an enthusiast. Well I'm off to order some wire.

VapingBad, thanks for that info. Generally speaking it seems a prebuilt stainless coil just has to stay under what ever the temperature set point is. Solves that issue, sucks that I can't get a clean curve with a factory made coil though.

I'm assuming you have this same mod. I like that curve. I do appreciate you taking the time to help me clean up my curves and provide some experienced insight. I agree that DJSLB's numbers do seem funny for somethings. I will try your settings and again I don't know if its because of a poor connection or the connection is perfectly fine, and I just have things turned up to 11, because lately everything in the vaping world defaults to 11, haha.

I've noticed the graphs on other posts about SS, and did notice they are erratic to say the least. I tried stainless last night and unless Wismec has the wrong mod resistance set, I was unable to find a satisfying sweet spot or consistent vape out of a stainless coil out of that tank. I did come across a guy who set his mod resistance to .0016 ohms. (https://www.djlsbvapes.com/dna200/) Wismec has the setting at .003 ohms. I don't know if I'm comfortable altering that just yet or try a build to see what the difference might be. I think I'm going to build a stainless coil and see if it might be the tank isn't as conductive or if there is an issue with the mod and the use of stainless.

The first puff is perfect. Preheat at 100w, Punch at 5.9. But the second two puffs, about 15 degrees of overshoot. These settings are easily something I can live with, and I'm probably going to do more tweaking with it. For the time being I'm happy with those. Time to work on the stainless coils and see how that works out.

So dropped my preheat power to about 120 getting much less overshoot, also i wasn't in the right temp range for my juice so i heated that up but got better curves than previously, will keep tuning to get it right. Also, is it common for temperature control to drain batteries faster than kanthol? I chain vaped on the 8 coil earlier today and it dropped my battery like maybe 10 percent then switch to TI1 TC and it wreaked my batteries.

Currently I am vaping on a TFV Ti coil, using temp control. I'm having some overshoot with my ramp. Its only about 20 degrees but I'd like my ramp to not overshoot my temp limit, Is that because my preheat punch is too hard or could it be because my preheat power is too much?

This mod isn't exactly noob friendly and that's awesome. I love DIY stuff, but I would like to have a 'baseline' and compare notes with someone else who's doing similar things as I am. Vaping has millions of styles, even more flavors. But with this mod I can truly personalize my experience just like anyone else can. Again, having a baseline is going to be helpful. So, I am using a couple of 'controls' for setting up my mod. Stuff off store shelves essentially. Yes, I do build but that isn't my 'point.' I'm working on trying to have a good go to setup for the average novice vaper. I am pretty sure I'm a solid like second string b-team vaper at best. I have 2 Smok TFV-4 tanks. One is my go to juice, the other is my sampling tank. Like coils, juice and what nots. Since the TFV has so many coil options both TC and traditional kanthol (in claptons as well) but also because they are more or less consistent with their build quality and resistances on their coils. But again I want someone else to be able to come in and say this was what I got on this coil ect. Or what I'd like to say is I tried your settings and enjoyed it. I am attaching my current setup in EScribe in this post. Edit: Current setup is as follows: Wismec Reuloux HG2 batteries and smok TFV4 tank dna1_31.ecig