Jump to content

CADmanSolid

Members
  • Posts

    1
  • Joined

  • Last visited

    Never

About CADmanSolid

  • Birthday 09/01/1986

Personal Information

  • Full Name
    Shannon Wright
  • Location
    Newcastle, N.S.W., Australia
  • What DNA product do you own or plan to buy?
    LAVABOX, Hcigar vt200, vtbox200

CADmanSolid's Achievements

New Member

New Member (1/3)

0

Reputation

  1. Hi, im new on this forum but have played with 316l a fair bit on my vt200 hcigar, and my lavaboxes and have a very good system system going for this material. This dna200 chip is a great piece of kit because you can trick it well depending on what alloys are in your wire. I use UD builders choice 316l with the wire wizard steam-engine.org curve for ss 316l elite. I used a temp probe inside cotton through my coils to tune my method and found this to be spot on accurate temp give or take 5 or so degreesF. i have found that any lower than 0.2 on ss316l is just to unstable to work with so i like to stick around the 0.2 0hms mark on 26awg for tanks and can go 24awg on drippers of ya like but it will be less stable. This is my build and settings: Dual contact coils 26awg @ 8 wraps on a 2.5mm post coming out @ 0.257 in a (Cloud chasers ink triforce rta deck that has a modded center pin right through from post to +510 bed for perfect conductivity) not important, you just need a good connection from coil to DNA chip (good atty). My mod resistance is set to 0.007 (This is important). Then I lock my ohms to 0.26 even though it is actually 0.257 (These small changes make a world of difference to your vape). I set my pre heat to 1w, 0 punch, 0 seconds (This is important). My over all wattage is set to 130w (this is important not to starve the power from the coils) but the DNA only sucks about 100-127w on a huge tooooot @ 535DegreesF and about 80w on a normal toot @ 480. I have this build in a sapor, verlocity, CLT V2 and a stro v2 and i can vape the wicks to totally dry with no burn at 420-480 degreesF and nearly totally dry at 500 degrees. A true constant 500 DegreesF at that wattage is a real hot vape and will make your atty to hot to touch after about 3-4 good toots and will boil your mouth like Gplat Claptons on a stacked 26650 mech, but with only a good chip and a pee size set of coils..... well maybe my mind is a little spun but it is still a real mean vape, defo better than any kanthal build in normal vw mode or on a mech. Just my 2000000000000000cents worth > < O 0 0
×
×
  • Create New...