[Battery not charging]

Found that this part is missing from the board

 

[Battery not charging]

Hi its the same on my pc at home

Thanks david


 

[Battery not charging]

Hi I got a new build and the battery is not charging even though the battery bar says so working fine otherwise.

Thanks David







 

[Opus 200 dead]

Smoove0214 said:

My opus just died for the 2nd time.. It was working fine, then nothing.. I was using a nickel coil in my crown tank, 50 watts at 530°... Blank screen, don't charge when plugged up, and won't connect to Escribe.. I'm at a loss...

Hi out of interest did the fuse go the first time ?

Thanks David

[Not the fuse this time completely dead ?]

Hi I was driving home form work last night vaping away and she goes dead in the middle of a vape on me not the fuse and the board looks fine no communication with escribe.

Its a mod a made myself and was working fine till a few weeks ago till the fuse went changed it and now this .19 ohms at 15 watts kayfun 4 battry showing 11.4v on both sides of the fuse on the volt metier.

Regards David

[510 ground on 6061-T6 Aluminium box]

Hi do I need to ground the 510 to the board if im screwing the board to a 6061-T6 Aluminium box ?

Regards David

[unbalanced cell ?]

Hi I found vaping by charging bought my cell back inline as soon as the other cells reach 4.2v it stopped charging

Regards David

[How to change the fuse ?]

bnitch said:

I found the best way to remove the fuse is to cut them off with wire snips then mix some regular solder in with what ever they are using ,then wick off excess to make a new pad. But I could be wrong..

This is what I done too

Regards David

[unbalanced cell ?]

the volts are coming back on my cell but its taking ages

 

[unbalanced cell ?]

Hi got a unbalanced cell after changing the fuse it was 3.85 yesterday after a charge up to 3.97 any ideas to get it back ?

Thanks David


 

[Not completely dead but not alive either. And doesn't work]

Hi mine had the same symptoms wired ohm reading and unstable power delivery before I changed the atty then the fuse went which I have changed now hope it's ok now Regards David

[How to change the fuse ?]

Thanks  I manged to replace the fuse not a nice job to do or looks pretty but is back working

Regards David

[How to change the fuse ?]

Hi my fuse has blow and was wondering the best way replace it ?

Thanks David

[Trade ya!]

I think its fitting the screen in before the board it is a tricky job I used automotive double sided tape, I damaged 1 screen trying to fit it lucky I had a spare from repairing my vaporshark rdna40 and using glue on a $200 mod it a bit of a cheek 

Regards David

Ps I will take a beta unit too lol

[Let's see your 200's!]

FireBALL said:

After looking at xevape's Hammond 1590a mod,  I decided to make a face plate for it and also a oLED holder.  It will be available on shapeways in a day or so

 

Going to have to make one of those 

Regards David

[Let's see your 200's!]

Got its 1590A 

Regards David

[Let's see your 200's!]

xevape said:

#2 in a 1590A

   

Video
https://instagram.com/p/50iEj3AWIS/?taken-by=xevape

Hi nice job where did you get that case ?

I think I would need to dig out my usb microscope to change the buttons

Regards David

[Question on tempture protection]

Your right thank you basilray

[Question on tempture protection]

Thanks i will try it

Regards David

[Question on tempture protection]

Is it possible to have the watts adjust once the given temperature is reached to maintain the set temperature instead of having temperature protection screen ?

Regards David

[box mod beginner]

If you put page 17 of the data sheet the pic of the board into word and up it 103% print it cut it to size you can use it to mark your holes

Regards David

[Any news on the beta case]

Hi any news when the beta case will go on sale ?

Regards David

[Let's see your 200's!]

Here is mine I take I didn't need the ground on the 510 ?

 

Regards David

[screw stays/spacers for board]

Hi had to make mine from these http://www.ebay.co.uk/itm/400328192495?_trksid=p2060353.m2749.l2649&var=670413166611&ssPageName=STRK%3AMEBIDX%3AIT


  

I used the m2  but you have to curve them of at the end so they don't touch the parts on the board

M1.6 screws 10 mm long and nuts  

Regards David

[All day battery?]

Tiny 133watt box mod

Regards David