[DNA 75C: Incorrect indication of the battery charge level.]

HI tramog

My vt75c dose the same

[Any feedback on HCigar VT75 Color?]

Mines going ok looking good with a bit of sanding and polishing  taken a few drops and knock too

[VTC 75C Warning]

8 hours ago, Lowbytes said:

Hmmmm.....okay - but how do you explain this melted insulator? Okay if it heats up the upper plate.........

This is what was about to happen to me, I was lucky and quickly pulled the battery out.

Hcigar are sending me out the new battery parts to replace.

[VTC 75C Warning]

Sorry to see this happen soulvape hope your ok ?, no one blames evolv this lies at hcigars door, at least the VT75  has a adjustable battery cap for different sizes batterys.

11 hours ago, soulvape said:

i have put a fogstar 26650 in the vt75c, and in one second a bomb was born!

 

[Let's see your 75c's]

[Any feedback on HCigar VT75 Color?]

Hi where did you hear that?

1 hour ago, Lowbytes said:

The "newer" batches of the Hcigar VT75C will have different Battery covers - they´ve also changed the threading of the battery cover and of the bat tube

so all early adaptors are disadvantaged - the parts are change able - but how to get them..............?

Mine came from gearbest - but i´m sure they will not ship the redesigned parts ..................

 

[Any feedback on HCigar VT75 Color?]

I agree I have gone back to using the tube and 18650 as the battery cap sits flush.

[Any feedback on HCigar VT75 Color?]

The same thing happened to me with 2 green efest 26650

David

 

[Room temperature always wrong.]

My vt75c is the same droopydoors about 10 degrees f higher, normal temp in device monitor though.

David

[Let's see your 75c's]

On 6/17/2017 at 10:04 PM, turbocad6 said:

Im liking these How much ? and where ?

David

[Any feedback on HCigar VT75 Color?]

As above poor leather panels on the black,  it gets warm if you chain vape, stock theme doesn't work no live data and dont over tighten the battery cap with a 26650 as it can short mine did.

David

[Vt75 can not changing screen layout]

Thank you got it

David

[Vt75 can not changing screen layout]

Like the bottom screen

[Vt75 can not changing screen layout]

Im trying to change screen layout to watts instead of temp but after I upload to device its still the same, or am I missing some thing?

Thanks David

[Whats the reason why the board becomes dead ?]

You can just make them out in this pic

     

[Whats the reason why the board becomes dead ?]

Hi thanks for all the help, as you can see in this pic the positive is sitting above the board no touching

 
Regards David

[Whats the reason why the board becomes dead ?]

Here you go

[Whats the reason why the board becomes dead ?]

Thanks for your help Nick nothing has shorted I no I'm not the greatest of solders just like to no where it's gone wrong before I buy another board m Thanks David

[Whats the reason why the board becomes dead ?]

Hi Nick thanks for your reply so what your saying is this mount shouldn't be earthed to the case ?
 
The screen is held in automotive double sided tape and I pre-tinned the wires and pre-flowing solder onto pads 

Regards David

[Whats the reason why the board becomes dead ?]

Hi

Whats the reason why the board becomes dead ?

I have had two now while vaping no errors messages.

I put the same atty on my sx mini m class and work fine so it cant be that.

This is my mod 36 hours of vaping gutted https://forum.evolvapor.com/topic/65689-topic/?do=findComment&comment=889338

Thanks David

[extremely weak vape no matter what I try.]

Hi can you give some details of your build Regard David

[Evolv worse than Smok reliability?]

Hi this is what I have experienced so far, programmed June board blown fuse which I changed then two weeks later completely dead which I can take being a early adopter, July board part missing of the board could of been me or missed in quality control.

 

My third board is programmed in August and comes tested this is the box. 36 hours later dead no blown fuse!

 

After the time and money I have spent building my last mod im so pissed off right now, time to come clean why these boards are dying evolv

[Let's see your 200's!]

lewisss said:

[QUOTE=David247]Here's my latest mod Regards David

Thanks for that, I just waiting for a chip back from evolv and your design will be used! Always wanted a squonk box , shame about the battery size, but I have a 2200mah 3s in my original dna but it is a bit of a brick! What buttons did you use there? And is that the squonk kit from mod makers as well?[/QUOTE]

Hi I will add the parts that I used for you later

Regards David

[Let's see your 200's!]

Mad Scientist said:

[QUOTE=David247]Here's my latest mod Regards David

Nice. Very well done. Where did you get the box? It looks to be exactly the perfect size for a "snug" fit of everything.[/QUOTE]

HI its this one http://www.modmaker.co.uk/Mod-Making-Supplies/Enclosures/ModMakerBox-Enclosures/ModMakerBox-WideBoy-Natural-Aluminium

Regards David

[Let's see your 200's!]

Here's my latest mod Regards David