brooklynguy1

My new Aria solara anarchist edition dna 200 mod bricked here is what happened: I turned off profile 1 to use in power mode as I am still not used to tc mode . I then checked my battery settings to make sure sure it was correct . I then went to device manager and checked all 3 cells were reading and performing correct . I then set some very basic settings as in what I wanted to see on the display and a picture on the welcome screen . after uploading I put an atty on at 3.67ohms at 57.4w hit the fire button and it shut off completely bricked I removed the atty and it came back on only now with the screen blinking from very bright to dimming slightly with what seems like a very very light reddish tint plugged the device back in to the software no charge indicator no response but the device is still recognized and except for what I described seems to have a normal appearance I removed the device and it shuts off . The device will only power on when plugged into the usb and when it comes on it is as I just described oh and if I put an atty on it shuts off, device manager shows 3.7v on all 3 cells . I am so lost as to what to do Yes I did try a hard and soft reboot and a usb recovery charge and nothing oh and restoring all factory defaults and recalculating the battery settings can someone please help thank you all so much