g.tuncelkilinc

i use 390 F in mini not dna mods. i tried titanium for few hours but doesnt really work that good.i still need to run in high temps (540-560) and in the end i get a slight singe taste / dry burn.with vt mini i can vape dry the hurricane without any bad taste at all.and when i say dry i mean dry.like not a singe drop of e liquid and pearl white cutton. its driving me crazy.vt mini is a piece of sh.t mod and it works on preset values. i dont understand may be its preheat or wattage settings but it hits the temp control instantly and doesnt give me anything.in mini you get at least few seconds of vape(i mtl too mostly on occasion lung too but really restricted like serpent was waay to airy for me) i may have to try the device monitor and atty analyzer.i never went deep on escribe maybe its time.

actually i am using their wires (mesh company).i am giving another go on titanium (its a b.tch to clean that wire) too but i only get good vape around 540-560 F which should give dry hits.right now i am using wismec dna 200 vtc has this problem on custom tcr (at least firmware 3.0) when you unscrew and screw atty it doesnt ask if its new coil so i am trying to keep away from it.

well if you are going that way i can say the exact opposite. look i am not qualified to test this devices and i know dna boards are accurate. to me it comes to this.cutton starts to singe on 480 F (as far as i know correct me if im wrong) and i want to keep the temp under that and get a good vape.i use tanks and i dont want dry hits.getting so weak vapor/flavor (wisps of vapor i am talking about) at 480 F with saturated wick is not acceptable. i am not in anyway defending joyetech.their build qualiity is garbage.look at wismec/joyetechs 510s.all i did was watch a review (the guy i mentioned before) from a guy who put thermocouples inside coils and get readings.evic was accurate (+ - 4 degrees) with s316l (firmware 3.0).i threw a evic mini before the latest firmware because i was frustrated it wasnt tc properly. and i know the dna 200 is so much complicated.thats why i want to get the thing working.i spend arout 250 bucks to these mods and getting nothing. right now i am vaping at 390 f with evic with no burnt taste and good flavor.

its very dissapointing dna couldnt do something that a mod that is cheaper than the boards itself could.i run the case study and change the setting.try one more time but i am not very optimistic. edit:yeah didnt changed any bit.i mean what the hell.both wismec and hcigar.wismec may have a shitty 510 but hcigar has a nice one both.i may have to buy a cuboid or rx 200 just for this.

ok first of all i love both of these mods but i cant get the same experince vtc mini at 420 F on the dna 200 mods. its interesting because using vtc mini (firmware 3.0) with custom tcr gives weak experince too.only factory settings.i can vape it dry and no dryhits.awsome.not bragging not advertising its what it is. both dna 200 mods settings (mod settings) were taken from djlsp vapes site.(on the side note i cant upload firmware and profiles too gives me unknown file format eror) so its not official. i also used battery curve from his site the mod settings for vt 200 are below VT200 Battery: Capacity: 11,87 Electrical: Mod Resistance: 0,022 (Gold Plated SS 510 connector version only) (the 510 connector's color is golden) Thermal: Case Cooling Time Constant: 287,72 Case Heating Time Constant: 301,48 Case USB Charge Temperature Rise: 9,26 10,52 Minimum Ambient Temperature: -20 Maximum Ambient Temperature: 110 both from the djlsp vapes profiles , steamengines csv files and tcr gives me again weak vapor. i am using s316l wire on a hurricane clone.Escribe version 1.0.32. i didnt change the firmware on them (couldnt,....hcigar doesnt even have one on their site.if there is i couldnt find it) You may say he is an idiot (djlsp vapes) but i only get same experince on dna 200 when i crank it up to 540-580.there must be something i am doing wrong.