urbanclock

Chiming in to say I also have this issue. It is a conflict with the mod and the keyboard drivers. I have a corsair k70 RGB keyboard, and what always works is flipping the small switch on the back of the KB all the way to the left. This puts the keyboard into BIOS compatibility mode and does not interfere with the mod in eScribe. Im not sure if razers and the other mentioned keyboards have a Bios setting but if they do I would try that. Hope it helps!

Hi guys I've got an issue with my hana modz v200 (pre-production unit) and since their service department hasn't responded in a week figured I'd ask around here. The mod has the pinched ribbon cable issue so the screen is invisible unless it is pitch black. It vapes fine and I can change settings by plugging into my PC, but obviously that is not what I want out of my 200$ device. I took it apart yesterday and removed the battery no problem. My problem is that the 3 screws that attach the board itself inside the case seem locked up. I can't get enough torque on them with the tiny size screwdriver they require, I'm afraid of stripping them to hell. Any tricks to removing these that you guys could share? Also will I need to order a new screen or will un-pinching the cable fix the issue?